BlueEars Bluetooth Phone and VOIP Gateway (Black) BE-BPG-331 User Manual
Product codes
BE-BPG-331
and then pair the Bluetooth headset or speakerphone with the BlueEars Phone Gateway. The PIN
code entered must be digits (0-9) and at most 10 digits long. (As to what PIN code should be
entered, please refer to the user manual of the Bluetooth headset). The BlueEars Phone Gateway
can be paired with different models of Bluetooth headset with their own PIN codes. To make it
easier to use, the BlueEars Phone Gateway has PIN codes of "0000", "1234", "6666" and "8888" as
its four default PIN codes. If the PIN code of your Bluetooth headset is just the same as "0000",
"1234", "6666" or "8888" for its pairing with BlueEars Phone Gateway, please follow up "A"; if
the PIN code of your Bluetooth headset is "xxx x" except the abovementioned four default PIN
codes for its pairing with BlueEars Phone Gateway, please follow up "B".
code entered must be digits (0-9) and at most 10 digits long. (As to what PIN code should be
entered, please refer to the user manual of the Bluetooth headset). The BlueEars Phone Gateway
can be paired with different models of Bluetooth headset with their own PIN codes. To make it
easier to use, the BlueEars Phone Gateway has PIN codes of "0000", "1234", "6666" and "8888" as
its four default PIN codes. If the PIN code of your Bluetooth headset is just the same as "0000",
"1234", "6666" or "8888" for its pairing with BlueEars Phone Gateway, please follow up "A"; if
the PIN code of your Bluetooth headset is "xxx x" except the abovementioned four default PIN
codes for its pairing with BlueEars Phone Gateway, please follow up "B".
A. PIN code of "0000", "1234", "6666" or "8888" for its pairing with BlueEars Phone Gateway.
Step 1: Connecting the power adapter to "DC Jack" and power it up.
The 7 segment LED display shows "8" for 1 second and at the same time, the BlueEars
Phone Gateway will enter into idle mode (flashes once every three seconds).
Phone Gateway will enter into idle mode (flashes once every three seconds).
Step 2: Put your remote device into pairing mode by following the instructions in the user manual.
Step 3: Press the "Pair" button for 3 seconds until the BlueEars Phone Gateway enters into
Step 3: Press the "Pair" button for 3 seconds until the BlueEars Phone Gateway enters into
pairing mode (the LED indicator flashes once every one second).The BlueEars Phone
Gateway attempts to pair and connect with your remote device automatically. When
successfully connected, the LED indicator will flash twice every one second.
Gateway attempts to pair and connect with your remote device automatically. When
successfully connected, the LED indicator will flash twice every one second.
Note: If the attempt fails, press the "Pair" button for 3 seconds to start another attempt of pairing.