Panasonic TY-3DTRW Leaflet

Page of 2
3D IR Transmitter
TY-3DTRW
SMG02/14/2011
© Panasonic Corporation 2011
Product specification
 (design and specification subject to change without notice)
IR input terminal
IR through input terminal
Power
Power Consumption
Infrared Ray Wavelength
Viewing Range
Dimenisons (W x H x D)
Weight
Carton Dimenisons (W x H x D)
Gross Weight
Operating enviroment
Included Accessories
*1: Make sure to use the power cable with the voltage and shape appropriate to your country and region.
*2: The dedicated stand should not be used in European countries. 
M3 jack x 1
M3 jack x 2
AC adapter Input: 110 to 127 V AC (the Americas), 220 to 240 V AC (except the Americas)   50 Hz/60 Hz 
Output: DC 16 V, 3.75 A
DC 16 V、4.0 W
850 nm
LONG:  3D IR Transmitter within  Approx.5.4 m from front surface
SHORT:  3D IR Transmitter within  Approx.3.8 m from front surface
 (Within ±35-degree horizontal, ±20-degree vertical)
190.0 mm × 50.0 mm × 58.2 mm 
with stand :190.0 mm × 69.0 mm× 69.7 mm 
Transmitter: Approx. 190 g (excluding the dedicated stand), Approx. 210 g (including the dedicated stand)
AC adapter: Approx. 190 g (excluding the power cable)
Approx. 470mm x 110mm x 260mm 
Approx. 2.5kg
Temperature: 0℃ to 40℃
Humidity : 20 to 80 % (Non condensation)
AC adaptor(1), Power cables
*1
(6), IR cable(10m x 1), Wire bracket (1), Clampers (2), Stand
*2
(1), Screw (1)
Cautions: This drawing is not a scale
Units : mm
DIMENSIONS
<without stand>
1/2
190
Tapped hole
(1/4-2OUNC)
29.5
58.2
50
Safty Regulations
Radiation Regulations
EN60065
EN55013,EN55020, CISPR13