Saeco Super-automatic espresso machine HD8750/18 HD8750/18 User Manual
Product codes
HD8750/18
12
ENGLISH
Manual rinse cycle
During this process you brew a coff ee and fresh water fl ows through the
steam/hot water circuit. This takes a few minutes.
steam/hot water circuit. This takes a few minutes.
1
Place a container under the dispensing spout.
2
Check that the “
”, “
”, “
” “
” lights fl ash steadily.
3
Press the “
” button. The machine starts dispensing water.
4
When the dispensing has fi nished, empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with
step 5.
step 5.
5
Place a container under the Pannarello.
6
Press the “
” button to start dispensing hot water.
7
Dispense water until the no water light “
” shines steadily.
8
At the end, fi ll the water tank again up to the MAX level. Now the the
machine is ready for brewing coff ee.
Note:
When you haven’t used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after
you switch it on. Thereafter you need to initiate the manual rinse cycle as
described above.
will automatically perform an automatic rinse/self-cleaning cycle after
you switch it on. Thereafter you need to initiate the manual rinse cycle as
described above.
The automatic rinse/self-cleaning cycle is also initiated automatically when
starting up the machine (with cold boiler), when the machine is preparing
to go into stand-by mode, or you have pressed the “
starting up the machine (with cold boiler), when the machine is preparing
to go into stand-by mode, or you have pressed the “
” button (after a
coff ee has been brewed).