Saeco Super-automatic espresso machine HD8750/18 HD8750/18 User Manual

30

 Remove the “INTENZA+” water fi lter from the water tank if it was instal-

led.

 Remove the water tank and pour the entire content of the Saeco decal-

cifi er. Then fi ll the water tank with fresh water up to the MAX level. 

 Place the water tank back into the machine.

 Place a large container (1,5 lt) under both the steam/hot water wand 

and the dispensing spout.

 Press and hold the “

” for 3 seconds. When the button starts 

fl ashing, release it to start the cycle. The “

” button fl ashes during 

the whole descaling cycle.

 Note: 

If you press the “

” button by mistake, press the “

” button to quit.

 The machine starts dispensing the descaling solution through the 

steam/hot water wand (the “

” button fl ashes) and the dispensing 

spout (the “

” button fl ashes).

 Note: 

The descaling cycle may be paused by pressing the “

” button. To 

resume the cycle, press the “

” button again. This allows you to empty 

the container or to stay away from the machine for a brief period of time.

 When the descaling solution is fi nished, the “

” light turns on and the    

“

” button fl ashes.