Transition Networks SVIDF2012-100 SVIDF2012-100-NA Leaflet

Specifications

Video Formats

NTSC, PAL, SECAM

Data Formats

RS-232, RS-422, RS-485

Data Rate

Serial: 115 kb/s

Status LEDs

PWR (Power): ON = Power connected
V (video): ON = video signal present
D (data): ON = data transmitted

Dimensions

Transmitter:
Width: 2.9" [74 mm]
Depth: 3.0" [76 mm]
Height: 1.0" [25 mm]

Receiver:
Width: 3.3" [84 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]

Power Supply

Input Power (TX): 
9 – 24 VAC/VDC direct input

Input Power (RX):
External AC/DC; 12 VDC, 0.4A

Environment

-100 models: -25°C to +75°C operating temperature
-110 models: 0°C to +60°C operating temperature

Altitude

0 – 10,000 feet

Operating Humidity

5% – 95% non-condensing

Shipping Weight

2 lbs. [0.90 kg]

Compliance

CISPR/EN55022 Class A + EN55024; EN60950 Class A; FCC Class A; 
CE Mark

Warranty

Lifetime

Ordering Info

BNC (75 ohm) 

to 850nm Multimode (ST)

BNC (75 ohm) 

to 850nm Multimode (SC)

BNC (75 ohm) 

to 1310nm Single Mode (ST)

BNC (75 ohm) 

to 850nm Multimode (ST)

BNC (75 ohm) 

to 850nm Multimode (SC)

BNC (75 ohm) 

to 1310nm Single Mode (ST)

Optional Accessories 

(sold separately) 

Wall Mount Bracket Kit
(for -100 models only)

DIN Rail Bracket 5.0" [127 mm]
(for -110 models only)

Wall Mount Bracket 4.0" [102 mm]
(for -110 models only)

12-slot Media Converter Rack
(for -110 models only)

4-slot Media Converter Shelf
(for -110 models only)

Piggy Back Power Supply

Stand-Alone Power Supply
(for -110 models only)

Transition Networks Analog Video + Data
TX and RX units transport analog compos-
ite video and data simultaneously over
multimode or single mode fiber up to 20
km. The TX device receives the video out-
put from the camera and transmits it over
the fiber cable. In addition, the TX device
receives the data stream over fiber and
transmits it to the camera to control PTZ
functionality. The RX device receives the
video signal on fiber and converts it back
to an analog composite video stream and
outputs the video on coaxial cable to the
monitor. In addition, the RX device receives
the data stream from the PTZ controller
and transmits it over the fiber cable to the
other end of the link.  

All conversion is performed in real time.
Automatic gain control installed on both
Transmitter and Receiver maintains de-
sired quality of video’s contrast and bright-
ness for extended distances. No field
adjustments are necessary. Wide input
range power supply allows for multiple
choices of power source including camera
power supply.

Features



AM Modulation



NTSC, PAL, SECAM compatibility



Supports unidirectional RS-232, 

RS-422 or RS485 data transmission  
for PTZ camera functionality



Extended temperature rating



Wide input power supply:

• Transmitter: 9 – 24 VAC; 9 – 40

VDC

• Bandwidth: 5 Hz – 10 MHz



Automatic Gain Control on TX and RX



Real Time Full Color Video



Transparent to Data 

Encoding/Compatible with Major

CCTV 

Camera Manufacturers



Video Specification:

• Input Video: 0.5 to 2-volt pk-pk 

(75 ohms)

• Receiver: 9 – 16 VAC/DC

• Differential Gain: < 5 %

• Differential Phase: < 5°

• Tilt: < 1%

• Signal/Noise Ratio: 60dB

stand-alone industrial media converter

Connect Uni-directional Analog Video Devices Over Fiber