Kingston Technology 64MB 100MHz Non-ECC CL2 SODIMM KVR100X64SC2/64 Data Sheet

Product codes
KVR100X64SC2/64
Page of 1
Memory Module Specification
0.000
0.787
1.250
0.000
1.141
2.660
R .078
R .030
ASSY USA
4M x 16 TSOP
4M x 16 TSOP
4M x 16 TSOP
4M x 16 TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
DESCRIPTION:
This document describes ValueRAM's CL2 8M x 64-bit (64MB) SDRAM (Synchronous DRAM)
PC100 Small Outline DIMM memory module. The components on this module include eight
4M x 16-bit (1M x 16-bit x 4 Bank / PC100 components) 4K Refresh SDRAM in TSOP
packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V. The electrical
and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (t
CC
)
min. = 10ns (CAS Latency = 2 / max. = 1000ns
Row Cycle Time (t
RC
)
70ns
CLK to Output (t
SAC
)
max. = 6ns (CAS Latency = 2)
Single Power Supply of
+3.3V (+/- .3V)
Power
2.101 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0050-001.A00
02/28/02
KVR100X64SC2/64
100MHz SDRAM 144-Pin
SODIMM Memory Module
Figure 1: KVR100X64SC2/64 64MB 144-Pin SDRAM Module
Note: All measurements are in decimal inches.
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).