Kramer Electronics TP-573 Leaflet
TP-573
HDMI, Bidirectional RS
−
232 & IR over Twisted Pair Transmitter
The TP
−
573 is a DGKat™ twisted pair
transmitter for HDMI, bidirectional RS
−
232
and infrared signals. The TP
−
573 converts
the input signals to a twisted pair signal and
the TP
the TP
−
574 converts it back to HDMI,
RS
−
232 and infrared signals.
Max. Data Rate
- 4.95Gbps (1.65Gbps per graphic channel).
HDTV Compatible.
HDCP Compliant.
DGKat™ Signal Integration
- Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
specifically for optimum performance.
HDMI Support
- x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS
−
HD.
3D Pass-Through.
EDID PassThru
- Passes EDID signals between the source and display.
Bidirectional RS-232 & IR Interface.
- 38400 max baud rate.
System Range
- Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC
−
DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC
−
DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC
−
DGKat723 cable.
Cable
- Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 and BC
−
DGKat723 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Power Connect System™
- A single connection to the transmitter powers both units.
Compact DigiTOOLS®
- 3 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional RK
−
3T rack
adapter.
FEATURES