Thecus Black Data Storage 4 bays N4100B Leaflet

Thecus N4100 IP Storage Appliance 

 

50

 

You can easily replace a damaged hard drive in the Thecus N4100, and your data is secure with the 

system’s automatic data recovery, provided you are using a RAID 1 or RAID 5 setting. 

 

When a hard drive is damaged, its bottom LED glows a steady red. If there is data in the RAID volume, then 

the system LED also glows red, and the system beeps. 

 

Replace a hard disk drive (HDD) as follows: 

1.  Remove the tray with the damaged HDD. 

2.  Unscrew the damaged HDD from the tray and put it aside. 

3.  Slide the new HDD into the tray and fasten the screws. 

4.  Insert the HDD and tray back into the Thecus N4100 until it snaps into place and lock it with a key if 

desired. 

5.  The LED blinks green when the HDD is accessed. If the Error LED flashes red it signals a problem.