Bosch DS936 User Manual
0 m
0 ft
0 ft
4 m
4 m
13 ft
13 ft
0 m
3 m
11 ft
Side View
Broad Coverage: Up to 7.5 m x 360° (24 ft x 360°).
Provides 360° coverage pattern. Coverage diameter is
approximately two times the mounting height.
Broad Coverage: Up to 7.5 m x 360° (24 ft x 360°).
Provides 360° coverage pattern. Coverage diameter is
approximately two times the mounting height.
Technical Specifications
Enclosure Design
Material:
High impact ABS plastic enclosure
Dimensions:
3.05 cm x 11.7 cm (1.2 in. x 4.6 in.)
Environmental Considerations
Operating Temperature:
-29°C to +49°C (-20°F to +120°F)
For UL Certificated installations, 0°C to
+49°C (+32°F to +120°F)
Radio Frequency
Interference (RFI)
Immunity:
No alarm or setup on critical frequencies
in the range from 26 MHz to 950 MHz at
50 V/m.
DS936:
Complies with Environmental Class II
(EN50130-5)
Mounting
Height Range:
2 m to 3.6 m (7 ft to 12 ft)
Location:
Surface or semi-flush on ceiling or on standard
10 cm (4 in.) octagonal electrical box
Pattern
Pointability:
±15° rotational
Outputs
Alarm:
Normally-closed reed relay rated at 3.0 W, 125 mA at
28 VDC for resistive loads and protected by a 4.7 Ω
resistor in the common C leg.
Tamper:
Normally-closed cover activated tamper switch with
separate terminals. Tamper contacts rated 125 mA at
28 VDC maximum.
Power Requirements
Current:
20 mA at 12 VDC
Voltage:
10 VDC to 15 VDC
Ordering Information
DS936 Low‑Profile Panoramic PIR Detector
Provides enhanced signal processing, 360° x 7.5 m (24
ft) pattern, mounts to surfaces, or mounts semi-flush
into a ceiling.
Order number
Provides enhanced signal processing, 360° x 7.5 m (24
ft) pattern, mounts to surfaces, or mounts semi-flush
into a ceiling.
Order number
DS936
DS936B Low Profile Panoramic PIR Detector
Provides enhanced signal processing, 360ﾟ x 7.5 m (24
ft) pattern, mounts to surfaces, or mounts semi-flush
into a ceiling. Black housing and white lens.
Order number
Provides enhanced signal processing, 360ﾟ x 7.5 m (24
ft) pattern, mounts to surfaces, or mounts semi-flush
into a ceiling. Black housing and white lens.
Order number
DS936B
DS936-FRA Low Profile Panoramic PIR Detector
For use in France. Provides enhanced signal
processing, 360° x 7.5 m (24 ft) pattern, mounts to
surfaces, or mounts semi-flush into a ceiling.
Order number
For use in France. Provides enhanced signal
processing, 360° x 7.5 m (24 ft) pattern, mounts to
surfaces, or mounts semi-flush into a ceiling.
Order number
DS936-FRA
DS936‑CHI Low Profile Panoramic PIR Detector
For use in China. Provides enhanced signal processing,
360° x 7.5 m (24 ft) pattern, mounts to surfaces, or
mounts semi-flush into a ceiling.
Order number
For use in China. Provides enhanced signal processing,
360° x 7.5 m (24 ft) pattern, mounts to surfaces, or
mounts semi-flush into a ceiling.
Order number
DS936-CHI
Accessories
TC6000 Test Cord
Test cord for connecting a compatible detector’s test
pins to a voltmeter. It is 4.6 m (15 ft) long.
Order number
TC6000 Test Cord
Test cord for connecting a compatible detector’s test
pins to a voltmeter. It is 4.6 m (15 ft) long.
Order number
TC6000
2 | DS936 Low Profile Panoramic PIR Detector