Thecus All-Purpose Storage Server N1200BR Leaflet
Product codes
N1200BR
26
LAN Configuration
The N1200 supports a 4-port
10/100 switch for higher
10/100 switch for higher
service availability. To
configure these ports, choose
configure these ports, choose
LAN from the Network menu,
and the LAN Configuration
and the LAN Configuration
screen appears. Press Apply
to save your changes.
to save your changes.
LAN Configuration
Item Description
MAC Address
MAC Address
Displays the MAC address of the LAN interface.
IP
Specifies the IP address of the LAN interface.
Netmask
Specifies the Network Mask of the LAN interface.
Jumbo Frame Support
Enable or disable Jumbo Frame Support on the LAN interface.
DHCP Configuration
A DHCP server can be configured to
assign IP addresses to devices
connected to the LAN ports. To
configure these ports, choose LAN
connected to the LAN ports. To
configure these ports, choose LAN
from the Network menu.
NOTE
Before enabling Jumbo Frame Support, please make sure your network equipment
supports Jumbo Frame. If your equipment is incompatible, you might not be able to
connect to your N1200. In this case, you have to reset the system back to default.
connect to your N1200. In this case, you have to reset the system back to default.
For the procedure of resetting N1200, please refer to the trouble shooting guide