Bosch LBB 1995/00 F.01U.522.370 User Manual
Product codes
F.01U.522.370
Communications Systems | LBB 1995/00 Plena Voice Alarm System Fireman's panel
LBB 1995/00 Plena Voice Alarm System
Fireman's panel
www.boschsecurity.com
u
Remote control of the voice alarm system
u
EN 54‑16 and EN 60849 compliant
u
Emergency (EMG) microphone
u
EMG state and fault indicators
u
Call monitoring loudspeaker
The Plena voice alarm remote control panels allow the
system to be controlled remotely from one or two
remote locations. There are five models available:
system to be controlled remotely from one or two
remote locations. There are five models available:
• The fireman's panel, which has oversized, illuminated
controls and an all-call function
• The main RC unit, which duplicates the front panel of
the Voice Alarm Controller
• The RC extension, which duplicates the front panel of
the router
• The main RC kit
• The RC extension kit
• The RC extension kit
The kits are a functional match to the remote control
and the RC extension, with connectors on the front
panel instead of controls and indicators.
and the RC extension, with connectors on the front
panel instead of controls and indicators.
Functions
The fireman’s panel is a remote control that has
specialized buttons and indicators for firemen. The
remote control has no zone selection, as the standard
RC has, but large backlit buttons.
specialized buttons and indicators for firemen. The
remote control has no zone selection, as the standard
RC has, but large backlit buttons.
It is possible to enter or acknowledge the emergency
state, and acknowledge and reset the fault state.
Emergency or alert messages can be started, and live
calls can be made.
state, and acknowledge and reset the fault state.
Emergency or alert messages can be started, and live
calls can be made.
An LED meter shows the presence and level of the
calls that are active in the system. The fault indicators
show detailed information of a fault in the system.
Connection to the Plena Voice Alarm System is via
standard, shielded CAT‑5 cable and RJ45 connectors.
The included rack mounting brackets can also be used
to mount the units to a rear wall with spacing for
cables, and even to a flat surface above or below the
unit.
calls that are active in the system. The fault indicators
show detailed information of a fault in the system.
Connection to the Plena Voice Alarm System is via
standard, shielded CAT‑5 cable and RJ45 connectors.
The included rack mounting brackets can also be used
to mount the units to a rear wall with spacing for
cables, and even to a flat surface above or below the
unit.
Certifications and approvals
Safety
acc. to EN 60065
Immunity
acc. to EN 50130-4
Emission
acc. to EN 55103-1
Emergency
acc. to EN 54‑16 / EN 60849