Gigaset S800 S30852-H2106-D201 User Manual
Product codes
S30852-H2106-D201
57
ECO DECT
Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / registr_sett.fm / 20.05.2010
V
e
rsion 4.1, 21
.11.2007
ECO DECT
You are helping to protect the environment
with your Gigaset S800/S800A.
with your Gigaset S800/S800A.
Reducing energy consumption
By using a power-saving adapter plug, your
telephone consumes less power.
telephone consumes less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u Handset: The closer the handset is to the
reduced automatically:
u Handset: The closer the handset is to the
base, the lower the radiation.
u Base station: The radiation is reduced to
virtually zero when only one handset is
registered and the handset is placed in
the base.
registered and the handset is placed in
the base.
You can reduce the radiation from the
handset and base even more by using Eco
Mode.
u Eco Mode
handset and base even more by using Eco
Mode.
u Eco Mode
Reduces the radiation of the base station
and handset by 80% - whether you are
making a call or not. Eco Mode reduces
the range of the base station by approx.
50%. Using Eco Mode always makes
sense when a reduced range is sufficient.
and handset by 80% - whether you are
making a call or not. Eco Mode reduces
the range of the base station by approx.
50%. Using Eco Mode always makes
sense when a reduced range is sufficient.
Switching off radiation
u Eco Mode+
When you activate Eco Mode+, radiation
(DECT transmission power) from the base
and handset is switched off in the idle
state.
This is also true when multiple handsets
are used, provided the handsets support
Eco Mode+.
(DECT transmission power) from the base
and handset is switched off in the idle
state.
This is also true when multiple handsets
are used, provided the handsets support
Eco Mode+.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets.
The handset must not be placed in the base.
deactivated independently of one another
and can also be used with multiple handsets.
The handset must not be placed in the base.
Activate/deactivate Eco Mode /Eco
Mode+:
Mode+:
v
¢
Ï
¢
Eco Mode
¢
Eco Mode / Eco Mode+
§Change§
Press the display key (
³ = on).
Status displays
Display icon
Ð i Ñ Ò
|
(flashes)
Signal strength:
– good to poor
– no signal
– no signal
Ð
white
Eco Mode deactivated
Ð
green
Eco Mode activated
¼ white
Eco Mode+ activated
(displayed instead of the
reception strength icon
when in idle status)
(displayed instead of the
reception strength icon
when in idle status)
¼
green
Eco Mode and Eco
Mode+ activated
Mode+ activated
Please note
u With Eco Mode+ activated, press and
hold the talk key
c to check that the
base can be reached. You will hear the
dialling tone if the base can be
reached.
dialling tone if the base can be
reached.
u When Eco Mode+ is activated:
– Call setup is delayed by approx.
two seconds.
– Handset standby time is reduced
by approx. 50%.
u Registering handsets that do not sup-
port Eco Mode+ will cause the mode
to be deactivated on the base and all
other handsets.
to be deactivated on the base and all
other handsets.
u Activating Eco Mode reduces the
range of the base.
u Eco Mode / Eco Mode+ and repeater
support (
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
you cannot use Eco Mode or Eco
Mode+.