Gigaset S800 S30852-H2106-D201 User Manual
Product codes
S30852-H2106-D201
61
Using multiple handsets
Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / registr_sett.fm / 20.05.2010
V
e
rsion 4.1, 21
.11.2007
Using multiple handsets
Registering handsets
You can register up to six handsets to your
base.
base.
A Gigaset S800H handset can be registered
on up to four bases.
on up to four bases.
Manually registering a
Gigaset S800H to a Gigaset S800/
S800A
Gigaset S800H to a Gigaset S800/
S800A
You must activate manual registration of the
handset on both the handset (1) and the
base (2).
handset on both the handset (1) and the
base (2).
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g., INT 1. If not, repeat
the procedure. .
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g., INT 1. If not, repeat
the procedure. .
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows. .
handsets for other devices with GAP func-
tionality as follows. .
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset S800H
handset.
v
handset from any registered Gigaset S800H
handset.
v
¢
Ï
¢
Registration
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
you wish to de-register and
press
§OK§
.
(The handset you are currently
using is highlighted with <).
using is highlighted with <).
~
Enter the current system PIN
and press
and press
§Save§
.
§Yes§
Press the display key.
Locating a handset ("Paging")
You can locate your handset using the base.
¤
Briefly press the registration/paging key
on the base (
on the base (
¤
All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging key
on the base or press the talk key
on the base or press the talk key
c on
the handset.
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
v
v
¢
Ï
¢
Registration
¢
Register Handset
If the handset is already registered to four
bases:
s
bases:
s
Select base, e.g., Base 3 and
press
press
§OK§
.
~
If required, enter the system
PIN for the base and press
PIN for the base and press
§OK§
.
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
set is searching for a base that is ready for
registration.
2) On the base
page 5) (approx. 3 seconds).
1) On the handset
Start to register the handset as described
in its user guide.
in its user guide.
2) On the base
page 5) (approx. 3 sec.).