Gigaset S800 S30852-H2106-D201 User Manual

Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / registr_sett.fm / 20.05.2010

V

e

rsion 4.1, 21

.11.2007

A handset is automatically assigned the 
lowest free number when it is registered. If 
all slots are occupied, number 6 is overwrit-
ten if this handset is in idle status. You can 
change the internal number of all registered 
handsets (1–6). 
u

Open the list of handsets. Your 
own handset is indicated by 

f

. 

Open menu.

Select and press 

.

r

Select number. Only numbers 
that have not been assigned are 
displayed.

Press the display key to save the 
input.

If the room monitor is activated, a previously 
saved destination number is called as soon 
as a set noise level is reached. You can save 
an internal or external number in your hand-
set as the destination number. All of the 
handset keys are deactivated, with the 
exception of the display keys.

The room monitor call to an external 
number is terminated after approximately 
90 seconds. The room monitor call to an 
internal number (handset) is terminated 
after approximately 3 minutes (depending 
on the base). When the room monitor is acti-
vated, all keys are locked except the end call 
key. The handset's speaker is muted. 

When the room monitor is activated, incom-
ing calls to the handset are indicated with-
out a ringtone and are only shown on the 
screen. The display and keypad are not illu-
minated and advisory tones are also turned 
off.

If you accept an incoming call, the room 
monitor is suspended for the duration of the 
call, but the function remains activated.

If you deactivate then reactivate the hand-
set, the room monitor remains activated. 

v 

¢

É

¢

¤

You can enter data in the following fields: 

Select On to activate.

Select Internal or External.

External number: Select the number 
from the directory (press display key 

ö

) 

or enter it manually. 
Internal number: Select display key 

  

¢

. Select handset or Call All to 

call all registered handsets  

¢

.

In idle status, the destination number or 
the internal destination number is dis-
played.

u Always check the operation of the 

room monitor before use. For exam-
ple, test its sensitivity. Check the 
connection if you are diverting the 
room monitor to an external 
number. 

u When the function is switched on, the 

handset's operating time is considera-
bly reduced. If necessary, place the 
handset in the base/charger. This 
ensures that the battery does not run 
down.

u Ideally the handset should be posi-

tioned 1 to 2 metres away from the 
baby. The microphone must be 
directed towards the baby. 

u The connection to which the room 

monitor is diverted must not be 
blocked by an activated answering 
machine.