Intel D845GEBV2 BLKD845GERG2-10PK User Manual
Product codes
BLKD845GERG2-10PK
Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
92
3.8 Boot Options
In the BIOS Setup program, the user can choose to boot from a diskette drive, hard drives,
CD-ROM, or the network. The default setting is for the diskette drive to be the first boot device,
the hard drive second, and the ATAPI CD-ROM third. The fourth device is disabled.
CD-ROM, or the network. The default setting is for the diskette drive to be the first boot device,
the hard drive second, and the ATAPI CD-ROM third. The fourth device is disabled.
3.8.1 CD-ROM
Boot
Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format
specification. Under the Boot menu in the BIOS Setup program, ATAPI CD-ROM is listed as a
boot device. Boot devices are defined in priority order. Accordingly, if there is not a bootable CD
in the CD-ROM drive, the system will attempt to boot from the next defined drive.
specification. Under the Boot menu in the BIOS Setup program, ATAPI CD-ROM is listed as a
boot device. Boot devices are defined in priority order. Accordingly, if there is not a bootable CD
in the CD-ROM drive, the system will attempt to boot from the next defined drive.
For information about
Refer to
The El Torito specification
Section 1.5, page 20
3.8.2 Network
Boot
The network can be selected as a boot device. This selection allows booting from the onboard
LAN or a network add-in card with a remote boot ROM installed.
LAN or a network add-in card with a remote boot ROM installed.
Pressing the <F12> key during POST automatically forces boot from the LAN.
3.8.3 Booting Without Attached Devices
For use in embedded applications, the BIOS has been designed so that after passing the POST, the
operating system loader is invoked even if the following devices are not present:
• Video adapter
• Keyboard
• Mouse
operating system loader is invoked even if the following devices are not present:
• Video adapter
• Keyboard
• Mouse
3.8.4 Changing the Default Boot Device During POST
Pressing the <F10> key during POST causes a boot device menu to be displayed. This menu
displays the list of available boot devices (as set in the BIOS setup program’s Boot Device Priority
Submenu). Table 49 lists the boot device menu options.
displays the list of available boot devices (as set in the BIOS setup program’s Boot Device Priority
Submenu). Table 49 lists the boot device menu options.
Table 49. Boot Device Menu Options
Boot Device Menu Function Keys
Description
<
↑> or <↓>
Selects a default boot device
<Enter>
Exits the menu, saves changes, and boots from the selected device
<Esc>
Exits the menu without saving changes