D-Link DGS-1510-20 User Manual

The DGS-1510 series provides a D-Link Network Assistant Utility and a 
web-based management interface that enables administrators to remotely 
control their network down to the port level. The D-Link Network Assistant 
Utility easily allows customers to discover multiple D-Link SmartPro Switches 
within the same L2 network segment. With this utility, users do not need to 
change the IP address of their PC. It also simplifies the initial setup of the 
SmartPro Switches. Switches within the same L2 network segment that are 
connected to the user’s PC are displayed on screen for instant access. This 
allows extensive switch configuration and basic setup of discovered devices 
including password changes and firmware upgrades. The DGS-1510 series also 
supports D-View 6.0 and Full features Command Line Interface (CLI) through 
console port. D-View 6.0 is a Network Management System that allows for 
the central management of critical network characteristics such as availability, 
reliability, resilience, and security. CLI management of the switches is possible 
via console port and Telnet interfaces. This makes it possible to adjust basic 
settings, passwords, configuration files, and firmware with ease.

The DGS-1510 Series provides static route, allowing you to segment your 
network into workgroups and communicate across VLANs without degrading 
application performance. With these capabilities, you can boost the efficiency 
of your network by offloading internal traffic-handling tasks from your router 
and allowing it to manage external traffic and security.  

The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such 
as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration 
of next generation networks. The DGS-1510 Series also supports a IPv4/v6 
dual stack function that allows the switch to act as a bridge between IPv4 and 
IPv6 networks. Finally, all DGS-1510 Series are certified to be IPv6 Ready Logo 
Phase 2, which guarantees interoperability for IPv6 environments. 

DGS-1510 switches are capable of conserving power without sacrificing 
operational performance or functionality by using D-Link Green 3.0 
technology. Using the 802.3az Energy Efficient Ethernet standard, the network 
will automatically decrease the power usage when traffic is low with no 
configuration required. For environments not fully supporting the standard, 
DGS-1510 switches offer advanced power-saving settings including port 
shutoff, LED shutoff, and system hibernation based on custom scheduling 
profiles. The profiles can also be applied to the PoE switch so that there is no 
unnecessary power consumption during off hours.