Digitus WLAN Broadband Router DN-7039-A User Manual

1. Click 

the 

Enable button to enable this function. 

2.  Select the radio button: Deny the stations not specified by any enabled entries in 

the list to access for Filtering Rules. 

3.  Delete all or disable all entries if there exist any entries already. 
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the 

MAC Address field, enter wireless station A in the Description field, select Allow in 
the Privilege pull-down list and select Enabled in the Status pull-down list. Click the 
Save and the Return button. 

5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the 

MAC Address field, enter wireless station B in the Description field, select Deny in 
the Privilege pull-down list and select Enabled in the Status pull-down list. Click the 
Save and the Return button. 

6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the 

MAC Address field, enter wireless station C in the Description field, select 128-bit 
in the Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP 
Key field and select Enabled in the Status pull-down list. Click the Save and the 
Return button. 
The filtering rules that configured should be similar to the following list: 

 

Note:  

a)  If you select the radio button Allow the stations not specified by any enabled 

entries in the list to access for Filtering Rules, the wireless station B will still 
not be able to access the router, however, other wireless stations that are not in 
the list will be able to access the router. 

b)  If you enable the function and select the Deny the stations not specified by 

any enabled entries in the list to access for Filtering Rules, and there are 
not any enable entries in the list, thus, no wireless stations can access the 
router. 

This page shows MAC Address, Current Status, Received Packets and Sent Packets 
for each connected wireless station. 

 

 - 

26 -