Addonics ADMS18SA Leaflet
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
1.8" mSATA adapter
INTRODUCTION
This 1.8" mSATA adapter is designed to enable mSATA (mini SATA)
SSD to be used as a direct replacement for a 1.8" micro SATA hard
drive. As a result, any equipment, such as Notebook computer,
iPOD that uses a 1.8" SATA hard drive can be easily converted to
use the low power and shock resistant mSATA SSD, just like a
SATA solid state drive (SSD). Once installed, the mSATA appears
as an ordinary SATA hard drive to any OS and can be configured as
a boot device.
SSD to be used as a direct replacement for a 1.8" micro SATA hard
drive. As a result, any equipment, such as Notebook computer,
iPOD that uses a 1.8" SATA hard drive can be easily converted to
use the low power and shock resistant mSATA SSD, just like a
SATA solid state drive (SSD). Once installed, the mSATA appears
as an ordinary SATA hard drive to any OS and can be configured as
a boot device.
When 1.8" mSATA adapter can also be used like a removable flash
media in the Addonics Micro SATA UDD reader/writer, allowing
easy read/write access to the mSATA SSD via USB 3.0 / 2.0 or
eSATA connection to any computer.
media in the Addonics Micro SATA UDD reader/writer, allowing
easy read/write access to the mSATA SSD via USB 3.0 / 2.0 or
eSATA connection to any computer.
Model: ADMS18SA
The 1.8 mSATA adapter is designed with the same
connector location and dimension as a 1.8” micro
SATA hard drive. It is a perfect solution for replacing
the micro Sata hard drive with the low power and
shock resistant mSATA media.
Using Addonics MIcro SATA UDD to read/write to
mSATA SSD