Aruba AP-134 Data Sheet
Aruba 130 Series Access Points
Aruba Data Sheet
Multifunctional 130 series wireless access points (APs)
maximize mobile device performance in extremely high-
density Wi-Fi environments.
maximize mobile device performance in extremely high-
density Wi-Fi environments.
These ultra-high-performance 802.11n APs deliver wireless data
rates up to 450 Mbps per radio and employ three spatial streams
to support 50% more throughput and mobile devices than
previous-generation APs.
rates up to 450 Mbps per radio and employ three spatial streams
to support 50% more throughput and mobile devices than
previous-generation APs.
The AP-135 and IAP-135 APs feature a 2.4-GHz and 5-GHz radio,
each with 3x3 MIMO and three integrated omni-directional downtilt
antennas. The AP-134 and IAP-134 models feature the same radios
with three (combined, diplexed) external antenna connectors.
each with 3x3 MIMO and three integrated omni-directional downtilt
antennas. The AP-134 and IAP-134 models feature the same radios
with three (combined, diplexed) external antenna connectors.
WI-FI CLIENT OPTIMIZATION
To eliminate sticky client behavior, every Aruba AP comes with
ClientMatch™ technology, which continuously gathers session
performance metrics and utilizes this data to steer mobile devices
to the best AP and radio on the WLAN, even while users roam.
ClientMatch™ technology, which continuously gathers session
performance metrics and utilizes this data to steer mobile devices
to the best AP and radio on the WLAN, even while users roam.
BEST-IN-CLASS RF MANAGEMENT
All Aruba APs include Adaptive Radio Management™ technology,
which is essential to creating the most reliable, high-performance
WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to
optimize Wi-Fi client performance and ensures that APs stay clear
of RF interference.
which is essential to creating the most reliable, high-performance
WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to
optimize Wi-Fi client performance and ensures that APs stay clear
of RF interference.
The 130 series can be configured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations to
corporate resources, and wireless mesh connections where
Ethernet drops are not available.
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations to
corporate resources, and wireless mesh connections where
Ethernet drops are not available.
CHOOSE YOUR OPERATING MODE
The 130 series of APs offers a choice of operating modes to meet
your unique management and deployment requirements.
your unique management and deployment requirements.
•
Controller-managed mode. When managed by Aruba Mobility
Controllers, 130 series APs offer centralized configuration, data
encryption, policy enforcement and network services, as well as
distributed and centralized traffic forwarding. Please refer to the
Aruba
Controllers, 130 series APs offer centralized configuration, data
encryption, policy enforcement and network services, as well as
distributed and centralized traffic forwarding. Please refer to the
Aruba
•
Aruba Instant™ mode. In Aruba Instant mode, a single AP
automatically distributes the network configuration to other
Instant APs in the WLAN. Simply power-up one Instant AP,
configure it over the air, and plug in the other APs – the entire
process takes about five minutes.
automatically distributes the network configuration to other
Instant APs in the WLAN. Simply power-up one Instant AP,
configure it over the air, and plug in the other APs – the entire
process takes about five minutes.
For large installations across multiple sites, the Aruba Activate™
service significantly reduces deployment time by automating
device provisioning, firmware upgrades, and inventory
management. With Aruba Activate, Instant APs are factory-shipped
to any site and configure themselves when powered up.
service significantly reduces deployment time by automating
device provisioning, firmware upgrades, and inventory
management. With Aruba Activate, Instant APs are factory-shipped
to any site and configure themselves when powered up.
If WLAN and network requirements change, a built-in migration
path allows 130 series Instant APs to become part of a WLAN that
is centrally managed by a Mobility Controller.
path allows 130 series Instant APs to become part of a WLAN that
is centrally managed by a Mobility Controller.
ADvANCED FEATURES
•
Spectrum Analysis:
- Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz
radio bands to identify sources of RF interference.
•
Security:
- With an
service subscription, Aruba Instant delivers
integrated web filtering, malware and botnet protection to
every device connected to the WLAN
every device connected to the WLAN
- Integrated Trusted Platform Module (TPM) for secure storage
of credentials and keys
- SecureJack-capable for secure tunneling of wired
Ethernet traffic
OPERATING MODES
•
802.11a/b/g/n Aruba Instant AP
•
802.11a/b/g/n Mobility Controller-managed AP
•
Air monitor (AM)
•
Secure enterprise mesh
•
Remote AP (RAP) when used with a Mobility Controller
WIRELESS RADIO SPECIFICATIONS
•
AP type: Dual-radio, dual-band 802.11n indoor
•
Software-configurable dual radio supports 2.4 GHz and 5 GHz
•
3x3 MIMO 802.11n with three spatial streams and up to
450 Mbps per radio
450 Mbps per radio
ARUBA 130 SERIES ACCESS POINTS
Maximize the performance of mobile devices