Kingston Technology 256MB, RIMM 184-PIN, RDRAM, ECC KVR1066X36-8/256 Data Sheet
Product codes
KVR1066X36-8/256
Features
■
2 Independent RDRAM channels, 1 pass through
and 1 terminated on 32-bit RIMM Module
■
High speed 800 and 1066MHz RDRAM devices
■
232 edge connector pads with 1mm pad spacing
■
Module PCB size: 133.35mm x 34.93mm x 1.27mm
(5.25 x 1.375 x 0.05)
■
Gold plated edge connector pad contacts
■
Serial Presence Detect (SPD) support
■
Operates from a 2.5 volt supply (±5%)
■
Low power and powerdown self refresh modes
■
Separate Row and Column buses for higher efficiency
Key Timing Parameters
The following table lists the frequency and latency bins
available for 32-bit RIMM modules.
Table 1: RIMM Module Frequency and Latency
RDRAM Core
Organization
I/O Freq.
MHz
t
rac
(Core Access
Time) ns
x 16
800
40
x 16
1066
32
x18
800
40
x18
1066
32
32 Bit RIMM module with heat spreader
Document No. VALUERAM0257-001.A00
08/29/02
Page 1
ValueRAM Part Number Scheme
Part #
Organization/Capacity
# of RDRAM Devices
KVR1066X32-4/128
KVR1066X36-4/128
KVR1066X32-8/256
KVR1066X36-8/256
KVR800A32-4/128
KVR800A36-4/128
KVR800A32-8/256
KVR800A36-8/256
KVR1066X36-4/128
KVR1066X32-8/256
KVR1066X36-8/256
KVR800A32-4/128
KVR800A36-4/128
KVR800A32-8/256
KVR800A36-8/256
32M x 32-Bit (128MB)
32M x 36-Bit (128MB)
64M x 32-Bit (256MB)
64M x 36-Bit (256MB)
32M x 32-Bit (128MB)
32M x 36-Bit (128MB)
64M x 32-Bit (256MB)
64M x 36-Bit (256MB)
32M x 36-Bit (128MB)
64M x 32-Bit (256MB)
64M x 36-Bit (256MB)
32M x 32-Bit (128MB)
32M x 36-Bit (128MB)
64M x 32-Bit (256MB)
64M x 36-Bit (256MB)
4 (256Mb)
4 (288Mb)
8 (256Mb
8 (288Mb)
4 (256Mb)
4 (288Mb)
8 (256Mb
8 (288Mb)
4 (288Mb)
8 (256Mb
8 (288Mb)
4 (256Mb)
4 (288Mb)
8 (256Mb
8 (288Mb)
Format
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
232-Pin 32-Bit Rambus non-ECC
232-Pin 32-Bit Rambus with-ECC
DESCRIPTION
Direct Rambus™ RIMM™ Modules
RIMM 4200 1066MHz 36-Bit (ECC) and 1066MHz 32-Bit (Non-ECC)
RIMM 3200 800MHz 36-Bit (ECC) and 800MHz 32-Bit (Non-ECC)
This document describes the ValueRAM™ by Kingston® RIMM 4200 (1066MHz 36-Bit ECC and 1066MHz 32-Bit Non-ECC) and
RIMM 3200 (800MHz 36-Bit ECC, 800MHz 32-Bit Non-ECC) Direct Rambus™ RIMM™ Modules.
RIMM 3200 (800MHz 36-Bit ECC, 800MHz 32-Bit Non-ECC) Direct Rambus™ RIMM™ Modules.
The Rambus 32 Bit RIMM
module consists of 256Mb/288Mb RDRAM™ devices. These are extremely high-speed CMOS DRAMs organized as 16M words
by 16 or 18-bits. The use of Rambus Signaling Level (RSL) technology permits the use of conventional system and board design
technologies. RIMM 3200 modules support 800MHz transfer rate per pin, resulting in total module bandwidth of 3200MB/s or
3.2GB/s. RIMM 4200 modules support 1066MHz transfer rate per pin, resulting in total module bandwidth of 4200MB/s or 4.2GB/s.
For available configurations, see the part number scheme below.
by 16 or 18-bits. The use of Rambus Signaling Level (RSL) technology permits the use of conventional system and board design
technologies. RIMM 3200 modules support 800MHz transfer rate per pin, resulting in total module bandwidth of 3200MB/s or
3.2GB/s. RIMM 4200 modules support 1066MHz transfer rate per pin, resulting in total module bandwidth of 4200MB/s or 4.2GB/s.
For available configurations, see the part number scheme below.
Memory Module Specifications
x16 (non-ECC)
x16 (non-ECC)
x16 (non-ECC)
x18 (ECC)
x18 (ECC)
x18 (ECC)