Netcomm NTC-30WV Product Datasheet

Page of 2
PRODUCT DATASHEET
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
NETCOMM WIRELESS LIMITED 
Head Office - 18-20 Orion Road, Lane Cove,  
NSW 2066, Sydney, Australia ABN 85 002 490 486 
E: sales@netcommwireless.com
NetCommWireless
www.netcommwireless.com
NetCommWireless
SPECIFICATIONS
MEMORY
• 
128MB DDR SDRAM | 256MB NAND Flash
OPERATING SYSTEM
• 
Embedded Linux 2.6
PEAK DATA SPEED
• 
Downlink: 21Mbps (HSDPA Cat. 14); Uplink: 
5.76Mbps (HSUPA Cat. 6);
CELLULAR BANDS
• 
UMTS/HSDPA/HSUPA: 850/900/2100/1900 MHz  |  
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
WIRELESS LAN
• 
IEEE 802.11b/g/n 2T2R; Frequency: 2.4 ~ 2.438 
GHz; Ralink RT3072 Chipset; Peak Data Rate: Max 
300 Mbps (MIMO, WPA2)
Wireless Security
WEP 64-bit, WEP 128-bit, WPA, WPA2, WPA-
PSK, WPA2-PSK, TKIP, AES, Multiple SSIDs
CONNECTIVITY
• 
1x (RJ-45) Ethernet 10/100Base-TX Port with Auto 
MDIX, 1x Mini USB 2.0 Console Port, 1x DC-in Port, 
1x FXS (RJ-11) Phone Port (optional)
ANTENNA INTERFACES
• 
2x N-Type Cellular (MIMO) 
• 
2x N-Type WLAN (MIMO)
SIM CARD READER
• 
Sealed Tray Reader, Push-Button-to-Release, Mini 
USIM/SIM Format
LED INDICATORS
• 
Power, Network Service Type, Tx/Rx Data Traffic, 
Data Carrier Connection, Signal Strength
REMOTE MANAGEMENT
• 
Web-based User Interface (HTTP), Telnet, SNMP 
v1/v2, TR-069 Client
LAN
• 
DHCP Server/Client/Relay, Static Route, UPnP
WAN
• 
WWAN (Cellular), PPPoE, PPP (PAP/CHAP)
ROUTING & POSITIONING
• 
Static,  RIP (v1/v2),  VRRP,  Dynamic DNS,  
NAT, DMZ
TELEPHONY
• 
Circuit-Switched Voice via Standard/Cordless 
Analogue Telephone
FIREWALL & SECURITY
• 
SPI Firewall, Anti-DoS
VPN
•  IPSec, 
PPTP, GRE, OpenVPN
ENVIRONMENT
• 
Normal Operating Temperature: -25°C ~ +60°C, 
Extended Operating Temperature: -25°C ~ +75°C 
(with Performance Deviations), Environmental 
Rating: IP-67 (sealed against water and dust)
POWER SUPPLY
• 
DC In port: 8 ~ 28 V with external power supply  
Standby Input Current
110 mA @ 12V DC
3G Active Input Current
300 mA @ 12V DC
Maximum Input current
o  560 mA @ 12V DC
DIMENSIONS & WEIGHT
• 
255mm (L) x 240mm (W) x 80mm (D) 2345g 
(including mounting and antennas)
MAXIMUM OUTPUT POWER ALLOWED
•  WLAN Module ERP = <20 dBm
The 
NetComm Wireless 3G Outdoor WiFi Router with Voice is designed to 
provide high-speed Internet connectivity to industries, businesses and remote 
unmanned installations on the fringe of cellular networks or in rural/metro areas with 
low service. It connects to the 3G network and can be mounted either on the wall or a 
pole and positioned in an optimal position on the outside of a property.
The powerful antenna system in the 
3G Outdoor WiFi Router with Voice can greatly 
boost reception and the device combines a cellular modem, Wireless LAN access 
point and telephone adapter together in one unit for use in an outdoor location.
The embedded cellular modem delivers data downloads of up to 21Mbps (HSPA+), 
which are routed via Ethernet connection inside the premise. With the integrated 
802.11n WiFi access point and MIMO antenna technology, the 
3G Outdoor WiFi 
Router with Voice can provide reliable WiFi coverage in the proximity of the premise 
for convenient outdoor Internet access.
The integrated telephone adapter connects standard analogue phone handsets to the 
3G Outdoor WiFi Router with Voice. It allows for phone calls to be made over the 
3G UMTS network from inside the premise for a full landline replacement. 
Optional 11n
WiFi Repeater
3G Tower
3G Outdoor WiFi  
Router with Voice
•  1 x 3G Outdoor WiFi Router with Voice 
•  2 x WiFi Antennas, 2 x 3G Antennas
•  1 x wall mounting kit
•  1 x pole mounting kit
•  1 x 10m DC power cable (open ended)
•  1 x power supply
•  2 x cable glands
•  1 x ferrite core 
•  1 x wireless security card 
•  1 x printed QSG
PACKAGE CONTENTS
This product includes a 10m power cable  
for direct connection to the included power 
supply (12V AC/DC).
Depending on your individual circumstances 
other power options can be used including 
Power over Ethernet and will need to be 
purchased seperately.
THINGS YOU SHOULD KNOW