OKI MicroLine 590 Elite 00036103 User Manual
Product codes
00036103
Form Tear-Off Feature
Form Tear-Off Feature
This feature automatically moves continuous-form paper up to the tear position after the selected
amount of time. The paper will return to the initial printing position when the printer receives data.
amount of time. The paper will return to the initial printing position when the printer receives data.
This feature is normally turned off. To activate it, hold the SHIFT button and press the SEL
button to enter the Menu Mode (1). Press the LF button until the Rear Feed group appears (2),
press the FF/LOAD button until Form Tear-Off appears (3), press the TEAR button (4) until the
setting you want appears 500 ms, 1 sec, or 2 sec then hold the SHIFT button while pressing the
SEL button to exit the Menu Mode (5).
button to enter the Menu Mode (1). Press the LF button until the Rear Feed group appears (2),
press the FF/LOAD button until Form Tear-Off appears (3), press the TEAR button (4) until the
setting you want appears 500 ms, 1 sec, or 2 sec then hold the SHIFT button while pressing the
SEL button to exit the Menu Mode (5).
Caution!
Do not engage Form Tear-Off when printing on labels.
Form Tear-Off Feature (continued)
To adjust the tear position with th Forms Tear-Off feature engaged, press and hold the SHIFT
button while using the LF button (1) to feed the paper down in small increments or the FF button (
2) to feed the paper up in small increments.
To adjust the tear position with th Forms Tear-Off feature engaged, press and hold the SHIFT
button while using the LF button (1) to feed the paper down in small increments or the FF button (
2) to feed the paper up in small increments.
ML590/591 ( 96-02-07 )