OKI MicroLine 590 Elite 00036103 User Manual
Product codes
00036103
Print Mode
Print Mode
Indicator Lights
1. POWER Light: Lights whenever the printer is on.
2. SEL Light: Lights when the printer is selected and ready to receive data. If this light is not lit,
the printer can not receive data. This light flashes when the printer is in the Print Suppress mode.
the printer can not receive data. This light flashes when the printer is in the Print Suppress mode.
3. ALARM Light: Lights when an error condition exists, such as when the printer is out of paper,
if there is a paper jam, or if the paper lever is set to the wrong paper path for the paper loaded. If
this light flashes, and continues to flash after you turn the printer off then on again, contact your
service representative.
if there is a paper jam, or if the paper lever is set to the wrong paper path for the paper loaded. If
this light flashes, and continues to flash after you turn the printer off then on again, contact your
service representative.
Í QUIET Light: Lights when the printer has been placed in the QUIET state.
Important! Any commands your software sends will override the front panel settings. Note: Your
printer has eight bar codes, EAN8, EAN13, UPC-A, UPC-E, CODE39, Interleaved 2 of 5, and
Code 128 sets A, B and C . For more details, use the Okidata Faxable Facts (call 1-800-
OKIDATA and follow the recorded instructions).
printer has eight bar codes, EAN8, EAN13, UPC-A, UPC-E, CODE39, Interleaved 2 of 5, and
Code 128 sets A, B and C . For more details, use the Okidata Faxable Facts (call 1-800-
OKIDATA and follow the recorded instructions).
To reset the character pitch to the factory default (10 cpi), deselect the printer, then hold the
SHIFT button while pressing the CHARACTER PITCH button.
SHIFT button while pressing the CHARACTER PITCH button.
ML590/591 ( 96-02-07 )