Bosch MIC-CABLE-10M User Manual

Page of 3
Video | MIC Series Composite Cables
MIC Series Composite Cables
High-quality, sun-resistant jacket
Multiple cable lengths
Factory-prepared ends
MIC Series composite cables provide all power, video,
and telemetry connections between a MIC Series
camera and a MIC Series power supply unit in a single
shielded cable.
These high-quality cables are specifically designed to
maximize flexibility while maintaining properties such
as strength and elongation. Each cable is fitted at one
end with an IP67-sleeved female connecter which
connects to, and shields, the male connecter in the
base of the camera. This provides a reliable, easy-to-
install, common connection for all MIC Series cameras.
The other end of the cable has individual /free (non-
terminated) wires for quick installation into terminals
in the MIC power supply unit, for connection to the
relevant control equipment and power source.
The cable shield connects to a metal cable gland to
ensure minimum EMC interference. The outer jacket of
the cable is UV-resistant. For maximum protection,
Bosch recommends that the cable be contained in
permanently earthed metal conduit.
Technical specifications
12-pin cable (for all MIC cameras except current
thermal cameras)
Cable Lengths *
2 m (6.56 ft)
10 m (32.81 ft) 
20 m (62.62 ft)
25 m (82.02 ft)
Cable diameter
8 mm (0.30 in.)
Cable weight
2m: 0.3kg (0.66 lb)
10m: 0.5kg (1.10 lb)
20m: 0.95kg (2.09 lb)
25m: 3.3kg (7.28 lb)
Video Cable
75 Ohm
Connecter diameter
25 mm (0.98 in.)
IP67, 12-pin female sleeved
Temperature range,
-40 °C to +80 °C (-40 °F to +176 °F)
Temperature range,
-55 °C to +85 °C (-67 °F to +185 °F)
Jacket material