Gorenje ECS8P2 405824 User Manual

406342

After each use of the glass-ceramic hob, wait for it to cool 

down and clean it; otherwise, even the smallest food residue will 
be burnt onto the hot surface next time you use the appliance. 
For regular cleaning and maintenance of the glass-ceramic 
surface, use special conditioning agents which form a 
protective layer on the surface, shielding it from dirt. Before each 
use, wipe any dust or other particles from the hob surface and 
pan bottom as these could scratch the surface (Figure 1). 
Careful: steel wool, abrasive sponges, and abrasive detergents 
can scratch the hob surface. Glass ceramic surface can also be 
damaged by aggressive sprays and inappropriate or insuffi ciently 
shaken (mixed) liquid cleaning agents (Figure 1 and Figure 2). 
Signage may be worn when using aggressive or abrasive 
cleaners or cookware with damaged bottom (fi gure 2).
Light stains can be removed by a damp soft cloth; then, wipe 
the surface dry (Figure 3). 
Water stains can be removed using a mild solution of vinegar; 
however, do not use this solution to clean the frame (only with 
some models, as it may become dull. Do not use aggressive 
sprays or decalcifi cation agents (Figure 3). 
Heavier stains can be removed using special agents and 
utensils for cleaning the glass-ceramic hobs. When using these 
products, follow the instructions provided by their respective 
manufacturers. 
Make sure any residues of cleaning agents are thoroughly 
removed, as they could damage the glass-ceramic hob when 
the cooking zones heat up (Figure 3).
Remove stubborn and burnt residues with a scraper (fi gure 4).
Be careful when handling the scraper to prevent injury.

Hold the scraper at the correct angle (45° to 60°). Gently press 
the scraper against the glass and slide it over the signage to 
remove the dirt. Make sure the plastic handle of the scraper (in 
some models) does not come into contact with a hot cooking 
zone.

Figure 2

Figure 3

Figure 4

Figure 

1

15