Typhoon Speednet Card 70035 Leaflet

Product codes
70035
Page of 1
A
N
U
B
IS
 E
L
E
C
T
R
O
N
IC
 G
m
b
H
A
N
U
B
IS
 E
L
E
C
T
R
O
N
IC
 G
m
b
H
T
H
E
  
  
M
U
L
T
I
M
E
D
I
A
  
  
C
O
M
P
A
N
Y
T
H
E
  
  
M
U
L
T
I
M
E
D
I
A
  
  
C
O
M
P
A
N
Y
Introduction
ANUBIS ELECTRONIC GmbH
Am Langfeld 38
66130 Saarbücken
Germany
Tel: 49-681-98806-0
Fax: 49-681-98806-111
Url: www.typhoonline.com
All information and specifications are subject to changes without prior notification.    Version1.0a
All rights reserved.      20004  © Copyright ANUBIS Electronic GmbH             KL123003
Connect your computer to your other system in the 
Network, or share data across computers. The 
Typhoon Fast Ethernet PCI Card provides you the link 
to all the computers in your environment. Complies with 
IEEE802.3 /  IEEE802.3u standards, the Ethernet PCI 
card enables you to manage and transfer data across 
the networks and share resources such as printer and 
data storage with your colleagues.
The PCI interface provides adequate bandwidth for 
your transfer and easy installation. The single RJ45 
socket provides both 10Mbps and 100Mbps network 
rate connections. 2 LEDs provide Link and Activity 
status for connection checks. Works with existing LAN 
using 10Mbps, 100Mbps and 1000Mbps setups.
Product Reference Number / Article number: 70035          Surf to www.typhoonline.com for more product information
Features:                         
!
Humidity: 10% - 90% RH
!
Comply with IEEE802.3 / IEEE802.3u 
!
Data Bus width: 32-bits PCI bus master
standards
!
Drivers for DOS, Win NT3.51, Win NT4.0, 
!
10Mbps / 100Mbps full & half duplex 
Windows® 95 / 98 SE / ME / 2000 / XP, 
flow control
NOVELL 3.11/4.X/5.x
!
Connects your computer to your LAN 
!
EMI and safety standards: FCC and CE 
networks and share data management
approved
!
Share your computer with other 
computers in the network system
!
Contents:
!
Share resources within the LAN such 
!
Typhoon Fast Ethernet PCI card
as printer, backup storage or data 
!
Installation Guide
retrieval storage
!
Driver disk (1.44MB floppy disk)
!
PCI 32-bit Bus Master architecture
!
PCI v2.2 standard
System Requirements:
!
Support UTP cables
!
Intel® Pentium® III or above
!
Boot ROM
!
128MB of system RAM or more
!
PCI v2.2 slot or lower
Specifications:
!
Windows® 98 SE / ME / 2000 / XP or 
!
Standard conformance: IEEE802.3U 
later
100Base-T / IEEE802.3 10Base-T
!
Existing LAN environment
!
Main interface standard: RJ45
!
RJ45 cabling
!
Transmission rates: 10/100Mbps
!
1.44MB floppy drive
!
Full duplex / half duplex transmission
!
Auto negotiation
!
Access method: CSMA / CD
!
Green coloured LED for Link status
!
Operating temperature: 0°C - 50°C
Article Number: 70035
TYPHOON FAST ETHERNET PCI CARD