HP 731179-151 User Manual

To navigate and select in Computer Setup, follow these steps:

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen.

You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the

keyboard to navigate and make selections in Computer Setup.

Press 

f10

 to enter Computer Setup.

●

To select a menu or a menu item, use the 

tab

 key and the keyboard arrow keys and then

press 

enter

, or use a pointing device to click the item.

●

To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the

screen, or use the up arrow key or the down arrow key on the keyboard.

●

To close open dialog boxes and return to the main Computer Setup screen, press 

esc

, and

then follow the on-screen instructions.

To exit Computer Setup menus, choose one of the following methods:

●

To exit Computer Setup menus without saving your changes:

Click the Exit icon in the lower-right corner of the screen, and then follow the on-screen

instructions.

– or –

Use the 

tab

 key and the arrow keys to select File > Ignore Changes and Exit, and then press

enter

.

●

To save your changes and exit Computer Setup menus:

Click the Save icon in the lower-right corner of the screen, and then follow the on-screen

instructions.

– or –

Use the 

tab

 key and the arrow keys to select File > Save Changes and Exit, and then press

enter

.

Your changes go into effect when the computer restarts.

Restoring defaults will not change the hard drive mode.

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen.

Press 

f10

 to enter Computer Setup.

Using Computer Setup

113