Kramer Electronics TP-580RXR Leaflet
TP-580RXR
HDMI, Bidirectional RS
−
232 & IR over Extended Range HDBaseT Twisted Pair Receiver
The TP
−
580RXR is an extended range,
HDBaseT twisted pair receiver for HDMI,
bidirectional RS
bidirectional RS
−
232 and IR signals. The
TP
−
580RXR receives an HDBaseT twisted
pair signal from the TP
−
580TXR and
converts it back into HDMI, RS
−
232 and IR
signals.
Max. Data Rate
- 10.2Gbps (3.4Gbps per graphic channel).
HDTV Compatible.
HDCP Compliance.
HDBaseT™ Technology.
HDMI Support
- Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS
−
HD,
CEC.
3D Pass-Through.
EDID PassThru
- Passes EDID signals between the source and display.
2K & 4K Support.
Bidirectional RS-232 & IR Interface.
- Commands and data can flow in both directions via the RS
−
232 interface,
allowing status requests and remote control of the destination unit.
System Range
- Up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when
using BC
−
HDKat6a cables
Cable
- For optimum range and performance using HDBaseT™, use Kramer's BC
−
HDKat6a cable. Note that the
transmission range depends on the signal resolution, source and display used. The distance using non
−
Kramer
CAT 6 cable may not reach these ranges.
Indicators
- Status LEDs for input, output, link and power.
Compact DigiTOOLS®
- 3 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional RK
−
3T
universal rack adapter.
FEATURES