Rode NT2000 Leaflet
M3
Multi Powered 3/4” Condenser Microphone
• Large 1” (25mm) HF1 gold sputtered capsule
• Continuously variable polar pattern, from Omni to
Cardioid to Figure 8 controlled on the mic
• Continuously variable PAD and High-Pass Filter
• Ultra low noise, transformerless surface mount
circuitry
• Wide dynamic range
Acoustic Principle
Pressure, Pressure gradient
Directional Pattern
Continuously variable multi
pattern - Omni, through
Cardioid to Figure 8
Frequency Range
20 Hz-20 kHz
Sensitivity
-36 dB re 1 Volt/Pascal (16 mV @
94 dB SPL) +/- 2 dB @ 1kHz
Output Impedence
200
Ω
Dimensions
Length - 208mm (8.1889”)
Diameter - 55mm (2.1653”)
Output Connection
3 pin XLR, balanced output
between Pin 2 (+), Pin 3 (-)
and Pin 1 (ground)
Shipping Weight
2.6kg
Net Weight
831g
• High strength welded and heat treated steel mesh head
• Internal capsule shock mounting
• Designed and manufactured in Australia
• Full 10 year warranty*
NT2000
Seamlessly Variable Dual 1” Condenser Microphone
Features
Specifications
Frequency Response
Polar Pattern
Included Accessories
*After online registration
Australia
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855
Fx: +61 2 9648 2455
USA
PO Box 4189 Santa Barbara CA 93140 USA
Ph: +1 805 566 7777
Fx: +1 805 566 0071
www.rodemic.com
• RC1 case
• SM2 shock mount
dB
re
1 V/Pa
20
10
0
-10
-20
-30
20Hz
100
1000
10 000 20 000
dB
re
1 V/Pa
20
10
0
-10
-20
-30
20Hz
100
1000
10 000 20 000
Cardioid
Cardioid
Omni
Figure 8
Omni