Bosch LTC 9488/20 User Manual
Video | LTC 9480 and LTC 9488 Series Housings Outdoor
LTC 9480 and LTC 9488 Series Housings
Outdoor
www.boschsecurity.com
u
For 1/4-inch, 1/3-inch and 1/2-inch CCD Cameras
u
Feed-through Wiring Option
u
Aluminum and Advanced Polymer Construction
u
Easy Installation
u
Full Camera Accessibility
The LTC 948x Series Housings are smartly styled
housings for outdoor use. These housings meet
customers' demands for attractive housings that are
both cost competitive and easy to install. They are
available in multiple sizes to fit a wide range of
cameras and lenses.
housings for outdoor use. These housings meet
customers' demands for attractive housings that are
both cost competitive and easy to install. They are
available in multiple sizes to fit a wide range of
cameras and lenses.
Functions
The design of these housings is unique. Removal of
two captive screws is all that is necessary to slide off
the cover and totally expose the camera and lens. This
allows access to all camera and lens controls when the
camera is in its mounted position. Power, video, and
lens control cabling can be routed through liquid tight
fittings in the bottom rear of the housing or can be
routed through the mounting base. Feed-through
mounts and J-mounts are available for these housings
to completely hide the cabling.
The base of the housings permits mounting to pan/
tilts, adjustable heads, and various wall mounts.
These sturdily constructed housings are available with
a preinstalled heater or a preinstalled heater and
blower. The heater maintains the internal temperature
two captive screws is all that is necessary to slide off
the cover and totally expose the camera and lens. This
allows access to all camera and lens controls when the
camera is in its mounted position. Power, video, and
lens control cabling can be routed through liquid tight
fittings in the bottom rear of the housing or can be
routed through the mounting base. Feed-through
mounts and J-mounts are available for these housings
to completely hide the cabling.
The base of the housings permits mounting to pan/
tilts, adjustable heads, and various wall mounts.
These sturdily constructed housings are available with
a preinstalled heater or a preinstalled heater and
blower. The heater maintains the internal temperature
of the housing in cold temperature conditions and the
heater/blower combination minimizes fogging in high
humidity locations and extends the temperature limits.
heater/blower combination minimizes fogging in high
humidity locations and extends the temperature limits.
Installation/configuration notes
277
10.9
196
7.7
50.8
2.0
20
0.8
107
4.2
96
3.8
8
0.3
89
3.5
73.7
2.9
mm
in
LTC 9480 Series