MuxLab 500025 Leaflet

©MuxLab 2004-2009                                                                                                                                         MonoPro XLR

Overview
The MonoPro™ XLR (500025, 500026) allows a
standard AES analog or digital audio channel to
be connected via Cat5e/6 unshielded twisted pair
cable (UTP) for the professional audio
environment.

The product features heavy duty cable strain
relief for rugged environments such as rental and
staging and is available with male or female
locking XLR3 connectors for added cabling
versatility.   May also be used as a solderless
connection point for standard shielded audio
cable.

Benefits
Cost efficient cabling via UTP
Robust design for professional use

Features
Line analog audio up to 5,000 ft (1.5km) via 

Cat 5

Digital audio up to 1,400 ft (426m) via Cat5e/6
UTP
Wires terminate inside balun
Locking XLR3 connector
Heavy-duty cable strain relief
Supports UTP or STP

Balanced line level or
microphone analog audio

Balanced line level digital audio

2.3 Vp-p

2 – 7Vp-p

Phase polarity sensitive

Not polarity sensitive

Output: 600 Ω  Input: 600-20kΩ

110 Ω

Professional balanced analog line
level or microphone

Professional balanced digital line level

Line level: 5,000 ft (1.5 km)
Mic level: 3,000 ft (914m)

Active microphone supported.  Requires
ground pin connected at both ends.
Distance unspecified.

Sampling Rate             Distance
32 kHz                          1,400ft (426m)
44.1 kHz                       1,300ft (396m)
48 kHz                          1,250ft (381m)
96 kHz                          unspecified

DC to 6 MHz

mixers, routers, switchers, format converters, splitters, distribution amplifiers,
boosters, receivers, encoders, CD players, DAT recorders, microphone pre-
amps, compressors, passive microphones, equalisers, active loudspeakers,
public address systems, rental and staging equipment.

Transparent to the user.

Less than 1 dB /pair from DC to 6 MHz

Less than 15dB from DC to 6 MHz

Greater than 45 dB

24 gauge or lower solid copper twisted pair wire impedance: 100 Ω at 1 MHz.
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz

XLR3-M or XLR3-F depending on model
Two (2) screw terminals for signal
One (1) screw terminal for optional shield (ground)

XLR3   Signal       UTP
Pin 1    Shield        Gnd (optional)
Pin 2    Positive     Tip [T]
Pin 3    Return       Ring [R]

Threaded and tapered cable grip mechanism.

Operating: 0° to 55° C.  Storage:-20°  to 85°C. Humidity: 95% non-condensing

Fire retardant plastic. UL94-V0

1.875” x 1” diam (4.76 cm x 2.54 cm diam) plus 5” (12.7cm) XLR3 lead

2.64 oz (75 gms)

AES/EBU 1982, AES-1992, ANSI S.40-1992, IEC-958

FCC, CE.

Lifetime

500025   MonoPro XLR, XLR3-M
500026   MonoPro XLR, XLR3-F