Bosch LC2-PC60G6-8H User Manual
Communications Systems | LC2‑PC60G6‑8H Premium‑sound High Ceiling Loudspeaker 60W
LC2‑PC60G6‑8H Premium‑sound High
Ceiling Loudspeaker 60W
www.boschsecurity.com
u
8‑inch coaxial two‑way with dual integrated
waveguides
waveguides
u
Waveguide coupled Ti tweeter
u
Full bandwidth overload protection
u
Front baffle wattage tap adjustment
u
BS 5839‑8 and EN 60849 compliant
The LC2‑PC60G6‑8H is an 8‑inch two‑way
Premium‑sound Ceiling Loudspeaker which provides,
wide dispersion, high efficiency, high maximum
output, ease‑of‑installation, innovative dual waveguide
that provides directivity control to 1 kHz and
wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille,
back‑can enclosure, 8‑inch coax two‑way loudspeaker
and internal output‑power matching transformer. The
loudspeaker features a waveguide coupled titanium
coated dome tweeter.
It provides much better music fidelity and speech
intelligibility in spaces with high ceiling heights than
typical flush units are capable of.
The rear enclosure provides an optimum internal
volume for extended low frequency performance.
The loudspeaker utilizes a second order crossover
network at 2.5 kHz, with a comprehensive protection
circuit to protect the network, woofer, and tweeter
drivers from excessive power levels.
The loudspeaker can be installed optionally with the
LC2‑PC60G6‑10 ceiling subwoofer to enhance the low
frequency reproduction down to 45 Hz.
Premium‑sound Ceiling Loudspeaker which provides,
wide dispersion, high efficiency, high maximum
output, ease‑of‑installation, innovative dual waveguide
that provides directivity control to 1 kHz and
wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille,
back‑can enclosure, 8‑inch coax two‑way loudspeaker
and internal output‑power matching transformer. The
loudspeaker features a waveguide coupled titanium
coated dome tweeter.
It provides much better music fidelity and speech
intelligibility in spaces with high ceiling heights than
typical flush units are capable of.
The rear enclosure provides an optimum internal
volume for extended low frequency performance.
The loudspeaker utilizes a second order crossover
network at 2.5 kHz, with a comprehensive protection
circuit to protect the network, woofer, and tweeter
drivers from excessive power levels.
The loudspeaker can be installed optionally with the
LC2‑PC60G6‑10 ceiling subwoofer to enhance the low
frequency reproduction down to 45 Hz.
Functions
Voice alarm loudspeaker
Voice alarm loudspeakers are specifically designed for
use in buildings where performance of systems for
verbal evacuation announcements is governed by
regulations. The LC2‑PC60G6‑8H is designed for use in
voice alarm systems and is compliant with British
Standard BS 5839‑8 and EN 60849.
use in buildings where performance of systems for
verbal evacuation announcements is governed by
regulations. The LC2‑PC60G6‑8H is designed for use in
voice alarm systems and is compliant with British
Standard BS 5839‑8 and EN 60849.
Protection
The loudspeaker has built‑in protection to ensure that,
in the event of a fire, damage to the loudspeaker does
not result in failure of the circuit to which it is
connected. In this way, system integrity is maintained;
ensuring loudspeakers in other areas can still be used
to inform people of the situation. It is standard fitted
with a back‑can enclosure to increase protection of
the cable termination.
The loudspeaker has an emergency compliant ceramic
screw‑terminal block and thermal fuse.
in the event of a fire, damage to the loudspeaker does
not result in failure of the circuit to which it is
connected. In this way, system integrity is maintained;
ensuring loudspeakers in other areas can still be used
to inform people of the situation. It is standard fitted
with a back‑can enclosure to increase protection of
the cable termination.
The loudspeaker has an emergency compliant ceramic
screw‑terminal block and thermal fuse.