MuxLab 500126 Leaflet
LongReach II
Active CCTV Receiver Hub
500126 [8p], 500127 [16p
MuxLab 2012 LongReach II Active CCTV Receiver Hub
Head Office
8495 Dalton Road, Mount Royal, Quebec, H4T 1V5
Tel: (+1) 514-905-0588 Fax: (+1) 514-905-0589
Toll Free: 877 689-5228 URL:www.muxlab.com
E-mail:
8495 Dalton Road, Mount Royal, Quebec, H4T 1V5
Tel: (+1) 514-905-0588 Fax: (+1) 514-905-0589
Toll Free: 877 689-5228 URL:www.muxlab.com
E-mail:
videoease@muxlab.com
Overview
The LongReach II Active CCTV Receiver Hub
(500126 [8p], 500127 [16p]) provides extended
distance between the CCTV camera and the
DVR via Cat5e/6 cable. The hub features Auto
Gain Control (AGC) and supports up to 5,000 ft
(1.5 km) via Cat5e/6 cable when used in
conjunction with MuxLab’s full range of passive
CCTV baluns.
The LongReach II Active CCTV Receiver Hub
(500126 [8p], 500127 [16p]) provides extended
distance between the CCTV camera and the
DVR via Cat5e/6 cable. The hub features Auto
Gain Control (AGC) and supports up to 5,000 ft
(1.5 km) via Cat5e/6 cable when used in
conjunction with MuxLab’s full range of passive
CCTV baluns.
The LongReach II Hub also allows video, remote
power and 2-wire PTZ control to be combined
over Cat5e/6 cable and features ground loop
isolation (GLI) for optimum video transmission.
power and 2-wire PTZ control to be combined
over Cat5e/6 cable and features ground loop
isolation (GLI) for optimum video transmission.
Applications
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, self-
storage, hospitals, car dealerships.
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, self-
storage, hospitals, car dealerships.
Features
8 or 16 channel analog CCTV hub
Up to 5,000 feet (1.5 km) via Cat5e/6
Up to 7,000 feet (2.1 km) via Cat5e/6 with
500100/101 at camera
Video, power and PTZ over one Cat5e/6
Auto Gain Control (AGC)
Auto Polarity Correction
Ground Loop Isolation (GLI)
LED diagnostics
8 or 16 channel analog CCTV hub
Up to 5,000 feet (1.5 km) via Cat5e/6
Up to 7,000 feet (2.1 km) via Cat5e/6 with
500100/101 at camera
Video, power and PTZ over one Cat5e/6
Auto Gain Control (AGC)
Auto Polarity Correction
Ground Loop Isolation (GLI)
LED diagnostics
Specifications
Environment
CCTV composite baseband video; NTSC, PAL, SECAM
Devices
CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV
equip.
equip.
Transmission
Transparent to the user
Video
Bandwidth
20 Hz to 8 MHz.
Input
1.5 Vp-p max, 100Ω, balanced (RJ45)
Output
1.1 Vp-p, ± 1 dB, 75Ω, unbalanced (BNC)
Insertion Loss
-14 dB minimum for luma, -60 dB minimum for chroma.
Determined by Automatic Gain Control.
Determined by Automatic Gain Control.
Return Loss
Greater than 15 dB over the frequency range
Common Mode Rejection
Greater than 40 dB @ 3.85 MHz
Ground Loop Isolation
Up to +/-50VDC
Auto Polarity Correction
Automatically adjusts for any polarity
Max. Distance via Cat5e/6
NTSC: 5,000 ft (1.5 km) with passive CCTV balun at camera
NTSC: 7,000 ft (2.1 km) with 500100/101 at camera
*Coax jumper cables must be less than 30 ft (9m)
NTSC: 7,000 ft (2.1 km) with 500100/101 at camera
*Coax jumper cables must be less than 30 ft (9m)
LED Diagnostics
Power, Video Sync
Auto Gain Control (AGC)
Automatically adjusts for gain, sharpness and luminosity.
Stabilization time: under 1 second
Stabilization time: under 1 second
Remote Power (i.e.; 24 VAC, 28 VAC)
Wiring
Remote low voltage power supported via two (2) or three (3) twisted pairs. A
Class II power supply is recommended.
Class II power supply is recommended.
Max. Distance @ 24VAC via
three twisted pairs*.
three twisted pairs*.
*Longer
distances may be achieved @ 28 VAC.
2 VA: 1,500 ft (457m)* 4 VA: 745 ft (227m)*
10 VA: 300 ft (91m)* 20 VA: 150 ft (46m)*
10 VA: 300 ft (91m)* 20 VA: 150 ft (46m)*
*Based on 10% voltage drop at camera. Please consult your CCTV vendor for more info.
Max. Current
2.5A rms or DC.
2-Wire PTZ Control (i.e. RS-422, Manchester/Bi-Phase, half duplex RS485)
Wiring
Remote 2-wire PTZ control supported via one (1) twisted pair.
Maximum Distance
Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor
Maximum Input Voltage
48 Volts (AC RMS/DC)
Maximum Current Rating
2A (AC RMS/DC). No fuse