Digitus Internet Broadband Router with 4 Port N-Way Switch DN-11004-O User Manual
Product codes
DN-11004-O
2.1.3 Rear Panel
The following graphic shows the rear panel.
•
AC In
: To connect the adapter to receive power.
•
USB
: This is USB Printer Port to connect your USB printer via USB cable. Please note
that “DO NOT” connect any other USB devices except USB printer or the “Self-Power
USB Hub” to the USB port.
USB Hub” to the USB port.
•
WAN
: To connect the Cabel/DSL modem via Cat.5 RJ-45 cable.
•
LAN 1~4
: To connect networked PC or uplink to Switch or Hub.
•
Reset
: Pressing the Reset button for more than
3 seconds,
the router will restore to
factory default setting. Please note that this should be done only when you had tried all
the troubleshooting options. Pressing the Reset button during operation may bring you
into the risk of creating
the troubleshooting options. Pressing the Reset button during operation may bring you
into the risk of creating
IP address
conflict between your
PC
and the router. In such a
case, you may be compelled to reboot your entire system.
2.2 Getting Started
Please refer to the following sections of this manual for additional information
about setting up a network.
2.2.1 System Requirement
Before you getting started, make sure that you meet the following requirements.
1.
1. An Internet connection through a cable or DSL modem
2.
2. A computer with an Ethernet network card installed
3. Your Windows CD , if your computer is running Windows 95, 98, or ME
4. UTP network cable with RJ-45 connector
5. Either Microsoft Internet Explorer 4.0 (or above version) or Netscape Navigator
4.0 (or above version)
10