Defender 21031 User Manual
34
Copy settings to other camera channels:
1. On the channel drop down menu select which settings you want to copy.
2. Select which channels to apply the settings to in the TO drop down box.
3. Click the COPY button.
4. Select APPLY to save changes.
2. Select which channels to apply the settings to in the TO drop down box.
3. Click the COPY button.
4. Select APPLY to save changes.
To change the SENSiTiviTy of motion detection for each camera:
1. Select the SENSITIVITY drop down list under the camera you would like to adjust the motion detection sensitivity.
2. Select 1 to 8 from the drop down list to adjust the sensitivity; 1 is the lowest sensitivity and 8 is the
1. Select the SENSITIVITY drop down list under the camera you would like to adjust the motion detection sensitivity.
2. Select 1 to 8 from the drop down list to adjust the sensitivity; 1 is the lowest sensitivity and 8 is the
highest sensitivity.
3. Adjust the sensitivity for all desired cameras.
4. Select APPLY to save the changes.
4. Select APPLY to save the changes.
Area Setup:
Area Setup allows you to set up the Motion Detection area. This setting allows you to adjust particular areas of each
camera where motion will and will not be detected. This is useful if you have a camera pointed towards something that
is always moving, such as a busy road. This way the DVR only records motion that is out of the ordinary, thus saving you
HDD space and providing you with more days of recording.
To adjust the ArEA setup:
1. Select the AREA SETUP option under the camera you would like to adjust the motion detection area and a separate
1. Select the AREA SETUP option under the camera you would like to adjust the motion detection area and a separate
screen will appear with a red mask on the picture and a grid.
2. The screen is fully red; this is because the DVR is automatically set to detect motion throughout the whole screen.
3. To adjust the motion detection area, left-click the mouse on the squares that you do NOT want motion detected.
3. To adjust the motion detection area, left-click the mouse on the squares that you do NOT want motion detected.
The squares that will NOT have motion detected will be black.
4. Right-click the mouse to exit the SETUP screen and click APPLY, to save your settings.
Area Setup Mask
MAIN MENU