MuxLab 500134 Leaflet

Passive CCTV Hub Plus

500134

_____________________________________________________________________________________

Head Office
Internet:www.muxlab.com
E-mail: videoease@muxlab.com

Overview
The Passive CCTV Hub Plus allows video, remote
power and PTZ control to be transmitted via one
Cat5e/6 cable, thus eliminating the need to install
multiple cables for more efficient cabling in the
security video environment. The hub includes a 16-
channel 18/2 power cable assembly to allow the
hub to be connected to a 16-channel CCTV power
supply for greater ease of installation.

Features/Benefits
Port switch to set Power-Thru or Pass-Thru mode
Includes 16-channel 18/2 power cable assembly
Pin configuration table on unit
Space efficient, rackmountable

Specifications

Environment

Composite video; NTSC, PAL, SECAM

Devices

CCTV cameras, DVRs, monitors, switchers, multiplexers and other CCTV equipt.

Transmission

Transparent to the user.

Video

Bandwidth

DC to 8 MHz.

Maximum Input

1.1Vp-p

Insertion Loss

Less than 2 dB per pair over the frequency range from DC to 8 MHz

Return Loss

Greater than 15 dB over the frequency range from DC to 8 MHz

Common Mode Rejection

Greater than 40 dB @ 8 MHz

Max. Distance - Colour

Cat 3 –1,200 ft (365m); Cat5e/6 – 2,200 ft. (670m)*

*Shorter distances will result with DVR equipment. Typically 1,000 to 1,500 ft

Max. Distance - B&W

Cat 3 –1,500 ft (457m); Cat5e/6 – 2,500 ft (762m)

Remote Power

Switch Mode

Pass-Thru Mode (500022)

Power-Thru Mode (500024/500029)

Number of twisted pairs

Two (2)

Three (3)

Max. Distance @ 24VAC*

*Based on 10% voltage drop at
camera. Longer distances may be
achieved @ 28 VAC.

5 VA: 350 ft (107m) 10 vA: 175 ft (53m)
20 VA: 90 ft (30m) 30 vA: 60 ft (20m)

5 VA: 518 ft (170m) 10 VA: 259 ft (85 m)
20 VA: 130 ft (43 m) 30 VA: 86 ft (28 m)

Maximum Input Voltage

50 Volts (AC RMS/DC). Recommended Class II PSU with fuse protection per port

Maximum Current Rating

4.5A (AC RMS/DC)

2-Wire PTZ Control (i.e. RS-422, Manchester/Bi-Phase, half duplex RS485) – Pass-Thru Mode (500022)

Wiring

Remote 2-wire PTZ control supported via one (1) twisted pair.

Maximum Distance

Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor**

**Please consult your CCTV equipment vendor for more detailed performance specifications.

Maximum Power Rating

50 Volts (AC RMS/DC); 3A (AC RMS/DC)

Mechanical & Environmental

Cable – UTP

24 AWG or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz

Cable – Coax

Impedance: 75 Ω at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed end to end.

Connectors

Video: 16 BNC-F Power: 16 2-pole terminals. Control: 16 2-pole terminals. Includes
16-channel 24” (61cm) 18AWG/2-wire power cable assembly terminated on 4-pole
screw terminal blocks (Packaged separately). Terminal blocks mate with hub.
Combined signals: 16 RJ45 jacks

Port Configuration Switch

Sets each port as Pass-Thru (500022) or as Power-Thru (500024/500029)

RJ45 Pin Configuration*

Signal

500022 Mode

500024/500029 Mode

*Reverse polarity sensitive

Power A (+)

1, 3

1, 3, 5

Power B (-)

2, 6

2, 4, 6

Control (+)

Not used

Control (-)

Not used

Video BNC Center (Tip)

7 [T] opposite to 500000

Video BNC Ground (Ring)

8 [R] opposite to 500000

Temperature

Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%

Enclosure

Black, anodized aluminum

Dimensions

19” (48.26 cm) W x 1.75” (4.4 cm) H x 1.5” ( 5.1 cm) D

Weight

2.6 lbs. (1.2kgs)

Warranty

Lifetime

Order Information

500134 Passive CCTV Hub Plus