Zhone ETHX-2214-DS3-DC Leaflet

Page of 2
Technical Specifications
EtherXtend DS3 Ethernet Access Device
Dimensions
1.9" High x 8.6" Wide x 6.75" Deep
4.8cm High x 21.7cm Wide x 17.1cm Deep
Weight
1.0 lbs (0.45 kg)
Power
AC Operation: 100-240 VAC; 50-60 Hz
DC Operation: -36VDC to -72VDC
10 watts (single DS3 port)
15 watts (dual DS3 port)
Interfaces
ETHX-2214-DS3:
- One (1) DS3 (75 ohm BNC)
- Four (4) 10/100BT Ethernet (RJ45)
- One (1) COM port (RJ45)
ETHX-2224-DS3:
- Two (2) DS3s (75 ohm BNC)
- Four (4) 10/100BT Ethernet (RJ45)
- One (1) COM port (RJ45)
Standards Support
NEBS Level 1
GR-063-CORE
GR-1089-CORE
IEEE 802.3 Ethernet
IEEE 802.1Q VLAN
IEEE 802.1p, DiffServ, TOS bit QoS
Protocol Support
Transparent 802.1D Bridging
Internet Protocol
Loop Bonding
Management
SNMP
CLI
Web Based Management
Bandwidth/Distance
Up to 45 Mbps per DS3 port (up to 90 Mbps
loop bonded)
Regulatory Compliance
EMC: FCC Part 15, ICES-003
Safety: ANSI/UL 60950-1, CAN/CSA C22.2,
IEC60950-1, EN60950-1
Operating Requirements
Temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Non-operating:: -40ºF to 158ºF (-40ºC to 70ºC)
Humidity: 5% to 95%, non-condensing
Altitude: -200ft to 16,500ft (-60m to 5,000m)
Ordering Information
EtherXtend DS3 Ethernet Access Devices
ETHX-2214-DS3-DC
EtherXtend CPE, N2N, 1PRT DS3 WAN, 4PRT 10/100BT LAN, DC Power
ETHX-2214-DS3-US
EtherXtend CPE, N2N, 1PRT DS3 WAN, 4PRT 10/100BT LAN, AC Power w/US Plug
ETHX-2224-DS3-DC
EtherXtend CPE, N2N, 2PRT DS3 WAN, 4PRT 10/100BT LAN, DC Power
ETHX-2224-DS3-US
EtherXtend CPE, N2N, 2PRT DS3 WAN, 4PRT 10/100BT LAN, AC Power w/US Plug
Optional 19/23-inch Rack Mount Kit
NETEXT-RMT-KIT
NET EXT, RACK MOUNT TRAY, TNE15X4/ENE20X4, ETHX22X4/ETHX21XX, SNE2040G
17 December 2010 11:36:42