MuxLab 500015 Leaflet
LongReach
Active CCTV Receiver Balun
500015
LongReach Active CCTV Receiver Balun
Overview
The LongReach Active CCTV Receiver Balun
provides extended distance between the CCTV
camera and the DVR or multiplexer via copper
twisted pair cable.
The LongReach Active CCTV Receiver Balun
provides extended distance between the CCTV
camera and the DVR or multiplexer via copper
twisted pair cable.
The LongReach features Automatic Image
Adjustment for picture brightness, sharpness and
contrast, thereby helping to reduce on-site
service calls. The LongReach supports up to
5,000 ft (1,5 km) via Cat5e/6 twisted pair cable
when used in conjunction with MuxLab’s full
range of CCTV baluns.
Adjustment for picture brightness, sharpness and
contrast, thereby helping to reduce on-site
service calls. The LongReach supports up to
5,000 ft (1,5 km) via Cat5e/6 twisted pair cable
when used in conjunction with MuxLab’s full
range of CCTV baluns.
Applications
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, entry
gates, self-storage, hospitals, car dealerships,
prisons
Campus, highways, airports, hotels, casinos,
commercial complexes, remote parking lots, entry
gates, self-storage, hospitals, car dealerships,
prisons
Benefits
Plug-and-forget - eliminates service calls
Eliminates fiber, coax and active transmitters
For extended distance or marginal installations
Plug-and-forget - eliminates service calls
Eliminates fiber, coax and active transmitters
For extended distance or marginal installations
Features
Up to 5,000 feet (1,524m) via Cat5e/6
Supports NTSC and PAL
Automatic Image Adjustment
Requires 24VAC (not supplied)
Ground Loop Blocking
Voltage Surge Protection
Auto-resettable fuse
LEDs for power, video and ground loop fault
Connects directly to DVR, multiplexer or switcher
Works with other MuxLab CCTV baluns
Cable strain relief
Up to 5,000 feet (1,524m) via Cat5e/6
Supports NTSC and PAL
Automatic Image Adjustment
Requires 24VAC (not supplied)
Ground Loop Blocking
Voltage Surge Protection
Auto-resettable fuse
LEDs for power, video and ground loop fault
Connects directly to DVR, multiplexer or switcher
Works with other MuxLab CCTV baluns
Cable strain relief
Specifications
Environment
CCTV equipment for security and surveillance. RS-343 (RS-170) NTSC, PAL
Devices
CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equip.
Transmission
Transparent to the user
Bandwidth
DC to 4.5 MHz.
Input
1.5 Vp-p max, 100Ω, balanced
Output
1.1 Vp-p, ± 1 dB, 75Ω, unbalanced
Insertion Loss
-14 dB minimum for luma, -60 dB minimum for chroma.
Determined by Automatic Gain Control.
Determined by Automatic Gain Control.
Return Loss
Greater than 15 dB over the frequency range
Common Mode Rejection Ratio
Greater than 40 dB @ 3.85 MHz
Maximum Dist. Color or B&W
Category 5 UTP: NTSC: 5,000 ft (~1.5 km) . PAL: 4,000 ft (~1.2 km)
Image Adjustment
Automatic Gain Control for sharpness and luminosity
LED Indicators
Green (Dim): Power. Green (Bright): Video Signal and AC power.
Red: Ground Loop Fault
Red: Ground Loop Fault
Cable – UTP
24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Cable – BNC
Impedance: 75 ohms at 1 MHz (RG59/U or RG6).
Input Connectors
Video: Two (2) screw terminals; reverse polarity sensitive.
Power: Two (2) screw terminals. Ground: One (1) screw terminal
Power: Two (2) screw terminals. Ground: One (1) screw terminal
Output Connector
Video: Male BNC with 5” coax lead.
Power (not supplied)
24V (AC or DC) floating +/- 20%, 110 mA RMS typical, 3W RMS max.
Video IN/OUT Surge protection
± 1.5 V max permanent voltage positive or negative pulse, 3 V max. 1 ms.
AC/DC power surge protection
Above 30VAC RMS or 42 VDC.
Built-In Fuse Protection
Auto-resetting upon power off.
Not user serviceable.
Temperature
Operating: 0° to 40°C. Storage:-20° to 85°C. Humidity: up to 95% non-condensing
Enclosure
Black - fire retardant plastic
Mounting
Velcro™ pad for optional surface mounting
Dimensions
2.40” x 2.25” x 1.0” plus 5” coax lead
Weight
3.26 oz (93 gms)
Regulatory
FCC and CE.
Warranty
1 year
Order Information
500015 LongReach Active CCTV Receiver Balun