Saeco Super-automatic espresso machine HD8752/23 HD8752/23 User Manual

43

43

 The machine automatically primes the circuit.

Y

ello

w

Y

ello

w

 The machine now carries out the warm-up and automatic rinse cycle to 

prepare for product brewing. 

 Empty the drip tray and place it back.

 Remove and empty the container.

 The descaling cycle is now completed.

 Place back the “INTENZA+” water fi lter into the water tank if it was 

installed and the Cappuccinatore.

 Note: 

At the end of the descaling cycle, wash the brew group as described in the 
“Weekly cleaning of the brew group” chapter.

The two rinse cycles are performed in order to have the circuit cleaned 
with a preset amount of water to ensure proper machine performance. 
If the water tank is not fi lled up to MAX level, the machine might require 
three or more cycles.

Red

 When the amount of water needed for the rinse cycle has been com-

pletely dispensed, this icon on the side is displayed. Press the “

” 

button to quit the descaling cycle.

 When the water tank is empty, remove the water tank, rinse it and fi ll it 

up to the MAX level with fresh water. Place it back into the machine.

 Empty the container and place it back under the dispensing spout.