Saeco Super-automatic espresso machine HD8762/03 HD8762/03 User Manual

55

55

Machine actions 

Causes 

Solutions

The machine grinds the 
coff ee beans but no coff ee 
comes out.
(See note) 

There is no water.

Fill the water tank and prime the 
circuit (chapter “Using the machine 
for the fi rst time”).

The brew group is dirty.

Clean the brew group ("Weekly clea-
ning fo the brew group" chapter).

The circuit is not primed.

Prime the circuit (chapter “Using the 
machine for the fi rst time”).

This might occur when the ma-
chine is automatically adjusting 
the dose.

Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting 
System".

The dispensing spout is dirty.

Clean the dispensing spout.

Coff ee is too weak.
(See note)

This might occur when the ma-
chine is automatically adjusting 
the dose.

Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting 
System".

Coff ee is brewed slowly.
(See note)

The coff ee grind is too fi ne.

Change coff ee blend or adjust the 
grind as explained in chapter “Adju-
sting the ceramic coff ee grinder”.

The circuit is not primed.

Prime the circuit (chapter “Using the 
machine for the fi rst time”).

The brew group is dirty.

Clean the brew group ("Weekly clea-
ning fo the brew group" chapter).

Coff ee leaks out of the 
dispensing spout.

The dispensing spout is clogged.

Clean the dispensing spout and its 
holes.

The milk was not frothed.

The automatic milk frother has 
been inserted too far. No milk is 
being sucked.

Let the Automatic Milk Frother cool 
down. Slightly move it downwards. 
Place it back in its proper seat.

The frothed milk is too cold.

The cups are cold.

Preheat the cups with hot water.

 Note: 

These problems can be considered normal if the coff ee blend has been 
changed or if the machine has just been installed. In this case wait until 
the machine performs a self-adjusting operation as described in chapter 
“Saeco Adapting System”.