Amzer AMZ20602 Leaflet

PEDESTALS, CRADLES & HOLDERS

CAR M

UNT

Customer Care
USA

1-866-663-2693

(44)1925-596205

Sugar Land, TX 77478, USA

Designed in USA | Made in China

INDIA +91-11-49367001

www.amzer.com

Suction Cup Mount

Safety Precautions

Follow all manufacturer safety guidelines for operating your device.

Failure to practice safe usage of GPS device while driving may result

in damage, injury, or death.
Amzer is not responsible for any damages caused to your car, your

device, or yourself due to the installation or use of this pedestal mount.

Package Contents:

(1) Round Disc

(2) Suction Cup Mount

(3) Smartphone Holder

Windshield Mounting

Step 1.

Step 2.

Step 1.

Swivel Ball Head Assembly Attachment

Step 1.

Attach Cradle or Device to Pedestal

To attach your cradle or device to the dual T-head, insert the

dual T-tabs (G) into the dual T-slots (H) on the back of the

cradle or device.

Do not place mount in or near an air bag deployment zone

or where it will obstruct view of the road.

Find a safe location on the interior of the vehicle’s wind-

shield to mount the pedestal. Firmly push the suction base

(A)

ip the base lever down (B)

to the locked position. See diagram below.

Adjust the angle of the pedestal arm by tightening the

angle adjustment knob (C) at the base to the desired angle.

Slip the tightening ring (D) over the pedestal ball. Snap

the dual-T head adapter plate (E) on to the pedestal ball

(F). Screw the tightening ring over the adapter plate until

securely holding the plate. Adjust the angle as needed.