Lancom Systems 1821 ISDN Router + ADSL2 + Modem Annex B LS61118 User Manual
Product codes
LS61118
LANCOM 1821+ Wireless ADSL
LAN protocols
IP
ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP- 1, RIP-
2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP
2, RTP, SIP, SNMP, TCP, TFTP, UDP, VRRP
IPX
RIP, SAP, IPX and SPX watchdogs, NetBIOS watchdogs
WLAN protocols
ADSL, Ethernet
PPPoE, PPPoA, IPoA, Multi- PPPoE, ML- PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP- 2
ISDN
1TR6, DSS1 (Euro- ISDN), PPP, X75, HDLC, ML- PPP, V.110/GSM/HSCSD, CAPI 2.0 via LANCAPI, Stac data compression
Interfaces
WAN: ADSL
ADSL over ISDN compliant with ITU G.992.1 Annex B (compatible to Deutschen Telekom U- R2 connections) or ADSL over POTS
compliant with ITU G.992.1 Annex A
compliant with ITU G.992.1 Annex A
WAN: ADSL2+
ADSL over ISDN compliant with ITU 992.3, ITU G.992.5 Annex B (ADSL2+) or ADSL over POTS compliant with ITU G992.3 and
ITU G.992.5 Annex A (ADSL2+)
ITU G.992.5 Annex A (ADSL2+)
Ethernet ports
4 individual 10/100- Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing
- freely configurable
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and
policy- based routing. DMZ ports can be operated with their own IP address range without NAT
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and
policy- based routing. DMZ ports can be operated with their own IP address range without NAT
ISDN
ISDN S0 bus
Serial interface
Serial configuration interface / COM port (8 pin Mini- DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/
GPRS modems
GPRS modems
External antenna connectors
Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Please
respect the restrictions which apply in your country when setting up an antenna system. For information about calculating the
correct antenna setup, please refer to www.lancom- systems.com.
respect the restrictions which apply in your country when setting up an antenna system. For information about calculating the
correct antenna setup, please refer to www.lancom- systems.com.
USB connector
USB 2.0 printer port
USB 2.0 full- speed host port for connecting USB printers per RAW- IP and LPD; bi- directional data exchange is possible (max.
12 Mbps, not for active- bus fed devices)
12 Mbps, not for active- bus fed devices)
Management
LANconfig
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP)
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP)
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and
connections, incl. PING diagnosis
connections, incl. PING diagnosis
WLANmonitor
Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations, incl. Rogue
AP and Rogue Client visualization
AP and Rogue Client visualization
Webconfig
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP
Access rights
Individual access and function rights for up to 16 administrators
User administration
RADIUS user administration for dial- in access (PPP/PPTP and ISDN CLIP)
Remote maintenance
Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload
via HTTP/HTTPS or TFTP
via HTTP/HTTPS or TFTP
ISDN remote maintenance
Remote maintenance over ISDN dial- in with calling- number check
Security
Access rights (read/Write) over WAN or (W)LAN can be set up separately (VPN only, Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access
control list
control list
Scripting
Scripting function for batch- programming of all command- line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes
irrespective of software versions and device types, incl. test mode for parameter changes
SNMP
SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II
Timed control
Scheduled control of parameters and actions with CRON service
TFTP
TFTP client and server with variable file names (name, MAC/IP address, serial number)
Diagnosis
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
Statistics
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting
Connection time, online time, transfer volumes per station. Snapshot function for regular read- out of values at the end of a
billing period.
billing period.
Export
Accounting information exportable via LANmonitor and SYSLOG
Hardware
Power supply
12 V DC, external power adapter (230 V)