Pro-Ject RPM 10.1 Evolution 20983 Leaflet

Product codes
20983
Page of 1
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger 
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 
www.project-audio.com · © Heinz Lichtenegger · Revision 1.10.2011 
 
 
Pro-Ject RPM 10.1 
Evolution 
Manual turntable with 
10" tonearm and 
equipment base 
Pro-Ject Ground it deluxe 3 
 
 
Product information
 
Turntable 

Chassis, motor housing and granulate filled equipment base Ground it deluxe piano-lacquered dark grey 

The equipment base Ground it deluxe rests on four individually height-adjustable magnetic field feet. 

A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. 

The medium density fibre plinth stands on three height-adjustable Sorbothane
®
-damped aluminium cones. 
Granulate filled plinth guarantees constant damping. A supplied spirit level allows easy adjustment. 

The motor is mounted in a separate metal housing to eliminate vibration transmission. 

The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 5,4Kg 
and a brass record puck. 

The magnet supported (amount of support adjustable), inverted bearing uses a stainless-steel axle carrying a 
ceramic ball on which the ceramic bearing plate runs. 

Central metal block optimises centre of gravity and damps main bearing. 

Connection to the phono input of the amplifier can be made with connecting cables of your taste through 
the gold plated phono sockets and earth screw. A standard cable is provided. 

External power supply avoids potential electro-mechanical interference. 
Tonearm  Pro-Ject 10cc Evolution
 

The headshell and armtube are fashioned from a single piece of carbon-fibre. 

Conical armtube avoids standing wave reflections. 

Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces. 

Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances. 

Sorbothane
®
-damped counterweight effectively counteracts unwanted resonances. 

The counterweights supplied are suitable for cartridges weighing between 4 - 6g, 5 - 8g, 6 - 10g or 8 - 14g. 
An alternative counterweight for cartridges weighing between 15 - 20g or 17 - 22g is available as an 
accessory part. 

Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing 
warped records. 

Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). 

Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. 

Silicone-damped armlift can be adjusted to suit working height of the arm. 

The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated 
phono sockets. 
Dimensions turntable, W x H x D: Including motor unit 480 x 210 x 330mm. 
Dimensions equipment base Ground it deluxe 3: 500 x 65 x 400mm 
Dust cover Cover it optional, W x H x D: 525 x 290 x 425mm. 
The manufacturer reserves the right to alter the technical specifications without notice.