Premier Mounts LMVP Leaflet

SECTION 11131

MOUNTS FOR AUDIO-VISUAL EQUIPMENT

PART 1 GENERAL

1.1 SECTION INCLUDES

A.Mounts and accessories for audio-visual equipment of the following types:

1.Flat-panel mounts.
2.Specialty enclosures.
3.Projector mounts.
4.Projector mount adapters.
5.Audio upgrade kits.
6.Custom mounts.
7.Carts and stands.

1.2 RELATED SECTIONS

A.Section 05500 - Metal Fabrications: Concealed steel support members.

B.Section 06100 - Rough Carpentry.

C.Section 06112 - Framing and Sheathing: Concealed wood framing and blocking.

D.Section 07900 - Joint Sealers.

E.Section 09110 - Non-Load-Bearing Wall Framing.

F.Section 09500 - Ceilings.

G.Section 16050 - Basic Electrical Materials and Methods.

H.Section 16100 - Wiring Methods.

I.Section 16800 - Audio Video Systems and Equipment

J.Section 16810 - Sound and Video Circuits.

1.3 SUBMITTALS

A.Submit under provisions of Section 01300.

B.Product Data: Manufacturer's data sheets on each product to be used, including:

1.Preparation instructions and recommendations.
2.Storage and handling requirements and recommendations.
3.Installation methods.

C.Shop Drawings: Shop drawings indicating details of construction and installation including but not limited to:

1.Location of wiring connections.
2.Anchorage details.

D.Warranty: At project closeout, provide an executed copy of the manufacturer's standard limited warranty against

manufacturing defect, outlining its terms, conditions and exclusions from coverage.

1.4 QUALITY ASSURANCE

A.Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with minimum

five years documented experience.

B.Installer Qualifications: Company specializing in performing work of this section with minimum three years documented

experience.

C.Mock-Up: Provide a mock-up for evaluation of clearances, installation techniques and workmanship.

1.Locate in areas designated by the Architect.
2.Do not proceed with remaining work until workmanship is approved by the Architect.
3.Rework mock-up area as required to produce acceptable work.
4.Accepted mock-ups shall be comparison standard for remaining work.

1.5 DELIVERY, STORAGE AND HANDLING

A.Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and

recommendations and industry standards. Protect from damage.

B.Store products in manufacturer's labeled packaging until ready for installation.

1.6 PROJECT CONDITIONS

A.Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by

manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's
absolute limits.

1.7 WARRANTY

A.Limited Lifetime Warranty: Premier Mounts warrants all mounting solutions products to be free from defects in

material and workmanship for the lifetime of the original installation of the product.

1.At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that

is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be
shipped at no charge, but related labor costs may not be covered.

2.Limitations: Premier Mounts disclaims any liability for damage to mounts, adapters, displays, projectors,

other property, or personal injury resulting, in whole or in part, from improper installation, modification, use or misuse of
its products. Premier Mounts disclaims all other warranties, express or implied, including warranties of merchantability
and fitness for a particular purpose. Premier Mounts is not responsible for incidental or consequential damages, including