Atdec Telehook TH-40100-UF TH-40100-UF Leaflet
Product codes
TH-40100-UF
Bits Bag
Component Checklist
Installation Instructions
FLAT SCREEN WALL MOUNT | FIXED
TH-40100-UF
Display Bracket (x2)
Wall Plate
Important Notes
TOOLS REQUIRED:
Power Drill
12mm (
1
/
2
”), 10mm (
3
/
8
”) or 7mm (
1
/
4
”) Drill Bit
Phillips Head Screw Driver
Spirit Level
17mm (
11
/
16
”) Socket Wrench or Shifter
Supports a maximum load of 150kgs (330lbs).
Suits displays with mounting hole patterns from 200mm to 800mm wide (8”-31.5”) by 200mm to 600mm
high (8”-23.5 ”).
The manufacturer does not accept responsibility for incorrect installation.
Security Bracket
Mounting Screws
M8x15mm / M8x35mm / M8x45mm (x4 each)
M6x15mm / M6x35mm / M6x45mm (x4 each)
M5x15mm / M5x35mm / M5x45mm (x4 each)
M4x15mm / M4x35mm / M4x45mm (x4 each)
Cross Recessed Screws
Coach
Screw (x4)
Masonry Wall
Plug (x4)
Washer (x4)
Multi
Washer (x4)
™
Mounting the Wall Plate
A
13mm Spacer
Bush (x4)
20mm Spacer
Bush (x4)
Masonry Wall
Timber Stud Wall
Note: Ensure the Wall Plate is mounted with the folded tabs point
upwards
upwards
Note: Ensure the Wall Plate is mounted with the folded tabs point
upwards
upwards
TIP: Use a spirit level to ensure the wall plate is horizontal
TIP: Use a spirit level to ensure the wall plate is horizontal
Use a stud finder to precisely locate the timber stud and ensure that the
mounting holes are located in the centre of the stud
It is recommended when mounting directly into masonry wall, that the
mounting holes are positioned as far apart as possible.
12mm (0.5”) hole
Masonry Wall Plug
Wall Plate
Coach Screw
Washer
7mm (0.25”) hole
Coach Screw
Washer
Wall Plate
Timber stud