Panasonic TH-47LFX60W User Manual

5/5

47-inch Tough LCD Display

TH-47LFX60W

PMY12/22/2014

3) When installing the Displays “side by side” or

“back to back”, please make sure hot exhaust

air is not drawn from the Inlet of the other

Display. A separator material may be installed

as illustrated.

“Side by side” installation

Separator

ᵦ

ᵦᶍ

ᶍᶒᶒ

ᵦ

ᵦᶍ

ᶍᶒᶒ

ᵡ

ᵡᶍ

ᶍᶍ

ᶍᶊᶊ

ᵡ

ᵡᶍ

ᶍᶍ

ᶍᶊᶊ

“Back to back” installation

Separator

ᵡᶍᶍᶊ

ᵦᶍᶒ

ᵡᶍᶍᶊ

ᵦᶍᶒ

(3) This display requires periodical cleaning or

 

purposes, please secure enough space (5cm +

work space) at the back of the Display (*2).

Fans

Air filter A

Air filter B

Air filter C (Folded into thirds)

LFX60

Filter cover

(Do not touch the fans)

?@" &' ; % @
spacing around the display is recommended
JK @"

(4) Surface of the LCD panel is cooled by intake

 

tempered front glass. After a certain period

of use, tiny particles of dust may stick to the

inside of the front glass. The dust can be

cleaned off by opening the front bezel frame as

shown below.

71cm

2cm

Remove 10 screws (at arrows)
to open the front frame bezel.
This will require work space at
the back of the display.

?N" 'Q % ' @
U %

(5) To use the Display in an environment where

the outdoor air temperature is lower than 0°C,

make sure to set the “Outdoor mode” to “On”

The inside temperature is kept constant and

startup can be performed smoothly. Also,

set the Outdoor mode to “On” if the Display

is installed where direct sunlight is on the

screen. Do not unplug the power cable while

using the Display with the Outdoor mode “On”.

(6) If the main power cannot be provided when

the Display is not in use, the Outdoor mode

will not function during stand-by. Protect the

display from direct sunlight by using a display

cover, etc.

(7) Angled installation

! ' & '& %
% @ %