Lancom Systems 3550 Wireless Router Gateway/Firewall 108Mbit LS61112 User Manual
Product codes
LS61112
LANCOM 3550 Wireless
WLAN
Frequency band 2.4 GHz or 5 GHz (EU
version)
version)
2400 - 2483.5 MHz (ISM) or 5150 - 5750 MHz or 5725- 5825 MHz (UK only)
Transfer rates 2.4 GHz
54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11,
5,5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b, Super A/G with Turbo Mode
(108Mbps), bursting, compression
5,5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b, Super A/G with Turbo Mode
(108Mbps), bursting, compression
Transfer rates 5 GHz
54 Mbps to IEEE 802.11a/h (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), Super A/G with Turbo Mode
(108Mbps), bursting, compression, fully compatible with TPC (adjustable power output) and DFS (automatic channel selection,
radar detection) according to ETSI regulations
(108Mbps), bursting, compression, fully compatible with TPC (adjustable power output) and DFS (automatic channel selection,
radar detection) according to ETSI regulations
Range *
Up to 150 m (up to 30 m in buildings) *
Maximum transmission power 2.4 GHz
802.11b: +19dBm @ 1 and 2Mbps, +19dBm @ 5.5 and 11Mbps
Maximum transmission power 2.4 GHz
802.11g: +19dBm @ 6Mbps, +14dBm @ 54Mbps
Maximum transmission power 5 GHz
802.11a/h: +18dBm @ 6Mbps, +12dBm @ 54Mbps with automatic transmission power control (TPC) and manual power settings
Minimum transmission power
Transmission- power reduction in software by 1dB steps to min. 0.5 dBm
Reception sensitivity 2.4 GHz
802.11b: - 87dBm @ 11Mbps, - 94dBm @ 1Mbps
Reception sensitivity 2.4 GHz
802.11g: - 87dBm @ 6Mbps, - 70dBm @ 54Mbps
Reception sensitivity 5 GHz
802.11a/h: - 87dBm @ 6Mbps, - 67dBm @ 54Mbps
Radio channels 2.4 GHz
Up to 13 channels, max. 3 non- overlapping (2.4- GHz band)
Radio channels 5 GHz
Up to 19 non- overlapping channels (5 Ghz band) with automatic dynamic channel selection (DFS)
Roaming
Seamless handover between radio cells, IAPP support, IEEE 802.11d support
WPA2 fast roaming
Pre- authentication and PMK caching for fast 802.1x authentication
Fast client roaming
With background scanning, mobile access points in client mode can switch to alternative access points which offer a better
signal before the connection to the first access point fails
signal before the connection to the first access point fails
VLAN
Support of up to 4094 VLAN IDs for WLAN connections, 32 simultaneously usable VLAN tags for 802.11x clients
Multi SSID
Simultaneous use of up to 8 independent WLAN networks per WLAN interface
Security
IEEE 802.11i / WPA2 with passphrase or 802.1x and hardware- accelerated AES, closed network, WEP64, WEP128, WEP152,
access control lists, RADIUS client, user authentication, 802.1x /EAP
access control lists, RADIUS client, user authentication, 802.1x /EAP
RADIUS server
Integrated RADIUS server for MAC address list management
Quality of Service
Support of Wireless Multimedia Extensions (WME, integral to IEEE802.11e), for example for prioritization of voice clients
Bandwidth limitation
Each WLAN client (MAC address) can be assigned maximum transmit and receive rates and an individual VLAN ID
Background scanning
The detection of rogue access points and the channel properties is carried out almost unnoticeably for all WLAN channels during
normal AP operation.
normal AP operation.
Client detection
Rogue WLAN client detection based on probe requests
802.1x supplicant
Authentication of an access point in WLAN client mode at another access point via 802.1X (EAP- TLS, EAP- TTLS and PEAP)
Notice
* The effective distance and transmission rate that can be achieved are depending of the given building conditions.
WLAN operating modes
WLAN access point
Infrastructure mode
WLAN bridge
Point- to- multipoint connection of up to 7 Ethernet LANs (mixed operation optional), broken link detection, blind mode, up to
32 VLANs simultaneously for WLAN connections
32 VLANs simultaneously for WLAN connections
WLAN router
Use of the LAN connector for simultaneous DSL over LAN, IP router, NAT/Reverse NAT (IP masquerading) DHCP server, DHCP
client, DHCP relay server, DNS server, PPPoE client (incl.Multi- PPPoE), PPTP client and server, NetBIOS proxy, DynDNS client,
NTP, port mapping, policy- based routing based on routing tags, tagging based on firewall rules, dynamic routing with RIPv2,
VRRP, spanning- tree protocol to support redundant routes in Ethernet networks
client, DHCP relay server, DNS server, PPPoE client (incl.Multi- PPPoE), PPTP client and server, NetBIOS proxy, DynDNS client,
NTP, port mapping, policy- based routing based on routing tags, tagging based on firewall rules, dynamic routing with RIPv2,
VRRP, spanning- tree protocol to support redundant routes in Ethernet networks
WLAN client
Transparent WLAN client node for wireless Ethernet extensions, e.g. connecting PCs or printers by Ethernet; up to 64 MAC
addresses
addresses
Routing functions
Router
IP and NetBIOS/IP multi- protocol router
HTTP
HTTP and HTTPS server for configuration by web interface
DNS
DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client
DHCP
DHCP client, DHCP relay and DHCP server with autodetection
NetBIOS
NetBIOS/IP proxy