Uniwide UniServer 1522VA 008-00134A Manual

 

84

 

 

The first is as follows: 

① 

In the configuration utility, select an adapter from the Adapter List. Select the RAID   

Properties option. This will display the current volume. 

② 

Press C to create a new volume. 

③ 

Continue with step 4 of Section 5.2, “Creating IS Volumes,” to create a second IS volume. 

 

The other way in which to add a second volume is as follows: 

① 

On the Adapter List screen, use the arrow keys to select an LSI Logic SAS adapter. 

② 

Press Enter to go to the Adapter Properties screen, shown in upper Figure.   

③ 

On the Adapter Properties screen, use the arrow keys to select RAID Properties and   
press Enter. 

④ 

Continue with step 4 of the IS creation procedure in the previous section to create a   
second volume. 

 

5.2.5.4  Other Configuration Tasks 

This section explains how to do other tasks related to configuring and maintaining IS volumes. 
 
5.2.5.4.1    Viewing IS Volume Properties 

Follow these steps to view the properties of IS volumes: 

① 

In the configuration utility, select an adapter from the Adapter List. Select the RAID Properties   

option. The properties of the current volume are displayed.   

② 

If more than one volume is configured, press Alt+N to view the next array. 

③ 

To manage the current array, press Enter when the Manage Array item is selected. 

 
 

5.2.5.4.2 Activating an Array 

An array can become inactive if, for example, it is removed from one controller or computer and moved to 

another one. The “Activate Array” option allows you to reactivate an inactive array that has been added to 

a system. This option is only available when the selected array is currently inactive. 

 

Follow these steps to activate a selected array. 

① 

Select Activate Array on the Manage Array screen. 

② 

Press Y to proceed with the activation, or press N to abandon it. After a pause, the array will become   

active.