Bosch LE10 F.01U.123.496 User Manual
Product codes
F.01U.123.496
Care Solutions | LE10 Radio Receiver
LE10 Radio Receiver
www.boschsecurity.com
u
Large number of transmitters can be assigned
u
Status indication with 2 LED indicators and 2 relays
u
Easy programming with one button
u
Multiple connecting possibilities
u
Nine different operating modes
With its multi-purpose operating modes, the LE10
Radio Receiver can be used in combination with wired
Emergency Call or wireless Resident Alert System. It is
designed to receive radio signals from different Bosch
radio transmitters at the frequency of 434.01 MHz.
Upon receiving radio signals from either programmed
or not programmed wireless transmitters, the LE10
Radio Receiver reacts by activating its two green and
red LED indicators and by switching the relay outputs
of its two relays.
Radio Receiver can be used in combination with wired
Emergency Call or wireless Resident Alert System. It is
designed to receive radio signals from different Bosch
radio transmitters at the frequency of 434.01 MHz.
Upon receiving radio signals from either programmed
or not programmed wireless transmitters, the LE10
Radio Receiver reacts by activating its two green and
red LED indicators and by switching the relay outputs
of its two relays.
Functions
The LE10 Radio Receiver can be set to one out of nine
different operating modes in which the device behaves
accordingly to different transmitter reception.
different operating modes in which the device behaves
accordingly to different transmitter reception.
Mode 1: Normal
20 wireless transmitters can be programmed.
Calls are indicated by LED 2 and Relay 1.
A battery-low signal is indicated by LED 2 and Relay 2.
Calls are indicated by LED 2 and Relay 1.
A battery-low signal is indicated by LED 2 and Relay 2.
Mode 2: LED 2 deactivated at battery-low indication
Same functions as in mode 1, except the battery-low
signal which is indicated only by Relay 2.
signal which is indicated only by Relay 2.
Mode 3: Dementia
MIYS37L and MIYS37E wireless transmitters are
detected. Relay 1 can be used to lock a monitored
door. Relay 2 can be used to interrupt a monitoring
loop.
detected. Relay 1 can be used to lock a monitored
door. Relay 2 can be used to interrupt a monitoring
loop.
Mode 4: Dementia with Accompany
The LE10 Radio Receiver can be connected to a wired
Emergency Call System, in which the Accompany
function can be implemented. Here the LE10 Radio
Receiver will wait 10 seconds after receiving a signal
from a MIYS37L transmitter. If it detects a MIYS37E
transmitter in this lapse of time, then no alarm is
generated. If not, then Relay 1 is activated for 2
seconds.
Emergency Call System, in which the Accompany
function can be implemented. Here the LE10 Radio
Receiver will wait 10 seconds after receiving a signal
from a MIYS37L transmitter. If it detects a MIYS37E
transmitter in this lapse of time, then no alarm is
generated. If not, then Relay 1 is activated for 2
seconds.
Mode 5: Remote control
20 wireless transmitters can be programmed. Per
sequence, only the same transmitter can switch on
and off Relay 1.
sequence, only the same transmitter can switch on
and off Relay 1.
Mode 6: Open receiver
No wireless transmitter needs to be programmed. Any
transmitter within reception range of the LE10 Radio
Receiver will activate the device.
transmitter within reception range of the LE10 Radio
Receiver will activate the device.