Kanex HDBASE100ME Leaflet
ABOUT KANEXPRO
KanexPro carries a broad selection of A/V connectivity products by leveraging the core strength in professional systems enabling you to broadcast, convert, extend, split, or
multiply HD signal transmissions; simply and cost-effectively. KanexPro is a trademark. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other product or service names are the property of their respective owners.
multiply HD signal transmissions; simply and cost-effectively. KanexPro is a trademark. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other product or service names are the property of their respective owners.
kanexpro.com
1405 Pioneer St., Brea, CA 92821
888.975.1368 info@kanexpro.com
888.975.1368 info@kanexpro.com
MPN: HDBASE100ME
FEATURES
• Extend signals up to 330 ft. (100m) on single
CAT6 cable
• Integrates 2-Ethernet ports for network devices
• Supports resolutions from 1080p/60@48bit to
• Supports resolutions from 1080p/60@48bit to
4Kx2K
• Supports data rates up to 10.2 Gbps
• HDCP, CEC and EDID compliant
• Infrared Signal Input/Output, embedded over
• HDCP, CEC and EDID compliant
• Infrared Signal Input/Output, embedded over
extension
• Audio support: Dolby TrueHD & DTS Master
Audio, 7.1 compliant
SPECIFICATIONS
Input
• 1 HDMI(HDMI female)
• 1 RS232(9 pin female D connector),
• 2 ETHERNET (RJ45)
• 1 IR in&out (3.5mm mini jack)
• 1 RS232(9 pin female D connector),
• 2 ETHERNET (RJ45)
• 1 IR in&out (3.5mm mini jack)
Output: 1 HDBase-T(RJ-45)
Input: 1 HDBase-T(RJ-45)
Output
Input: 1 HDBase-T(RJ-45)
Output
• 1 HDMI(HDMI female)
• 1 RS232(9 pin female D connector)
• 2 ETHERNET (RJ45)
• 1 IR in&out (3.5mm mini jack)
• 1 RS232(9 pin female D connector)
• 2 ETHERNET (RJ45)
• 1 IR in&out (3.5mm mini jack)
Transmission Mode: HDBase-T, synchronous
switching mode.
switching mode.
Resolution: 1080p@60Hz@48 b/pixels/3D/4Kx2K
Gain: 0dB ~ 10dB@100MHz
Transmission Distance: Max distance 330 ft (100m)
Differential Phase Error: ±10° @ 135MHz_100M
Bandwidth: 10.2Gbps
Return Lost: -30dB@5KHz
HDMI Standard: Support HDMI1.4 and HDCP
Min. / Max. Level: 0.3V ~ 1.45Vp-p; 75Ω
Power Supply: 5V DC; 6.5W
Temperature: -20 ~ +60℃
Humidity: 10% ~ 90%
Chassis Dimension: W77 x H30 x D134mm
Gain: 0dB ~ 10dB@100MHz
Transmission Distance: Max distance 330 ft (100m)
Differential Phase Error: ±10° @ 135MHz_100M
Bandwidth: 10.2Gbps
Return Lost: -30dB@5KHz
HDMI Standard: Support HDMI1.4 and HDCP
Min. / Max. Level: 0.3V ~ 1.45Vp-p; 75Ω
Power Supply: 5V DC; 6.5W
Temperature: -20 ~ +60℃
Humidity: 10% ~ 90%
Chassis Dimension: W77 x H30 x D134mm
The KanexPro HDBASE100ME is
a transmitter- receiver set that
enables you to routes Ultra high
– definition signals up to 330
feet (100 meters). This extender
also features two Ethernet ports
on both the units, which can be
used to connect standard network
devices such as 100Base-T routers,
switches and hubs for LAN access.
a transmitter- receiver set that
enables you to routes Ultra high
– definition signals up to 330
feet (100 meters). This extender
also features two Ethernet ports
on both the units, which can be
used to connect standard network
devices such as 100Base-T routers,
switches and hubs for LAN access.
Ideally used with Apple TV’s,
Blu-ray players, game consoles,
satellite boxes and HDMI based
computers that require extension
up to 330 feet connected to an
HDTV or projector. Fully compliant
with HDCP, EDID and DDC
channels, this extender supports
resolutions up to ultra HD 4K,
1080p & 3D.The transmitter and
receiver sets are built in to metal
enclosure with sturdy finish that
protects the inner components and
IC’s at optimum temperatures up
to 70 C.
Blu-ray players, game consoles,
satellite boxes and HDMI based
computers that require extension
up to 330 feet connected to an
HDTV or projector. Fully compliant
with HDCP, EDID and DDC
channels, this extender supports
resolutions up to ultra HD 4K,
1080p & 3D.The transmitter and
receiver sets are built in to metal
enclosure with sturdy finish that
protects the inner components and
IC’s at optimum temperatures up
to 70 C.
100 Meter HDMI
®
Extender
w/ HDBaseT® & 2 Port - Ethernet Switch
• Uncompressed audio support such as LPCM
• RS-232 Control
• Front panel-LEDs for link activity and HDCP
• RS-232 Control
• Front panel-LEDs for link activity and HDCP
authentication
• Locking HDMI connectors to avoid dis-
engagement and signal loss
• Locking power connector
• Aluminum case with separate mounting ears –
• Aluminum case with separate mounting ears –
flexible for installation
• KanexPro 3-Year Warranty